[Elecraft] Crowdfunding a 1500 watt amp - SURVEY?

Ron D'Eau Claire ron at cobi.biz
Mon Aug 1 17:28:19 EDT 2016


A serious mistake some antenna-limited Hams make is to try to make up for a poor antenna near the ground with more power. A situation like Jim brings up would likely produce a number of ill effects such as:

1) Producing interference in many nearby pieces of equipment from Hi-Fi systems to DVRs, broadcast receivers, etc.

2) If the antenna is not carefully insulated and isolated, animals and people can receive very painful RF burns and in the extreme set fires. For those who have not experienced a severe RF burn, it instantly creates deep tissue damage that is very painful for days or weeks afterward.

3) Short antennas (whips, short wires, etc.) easily produce corona discharges at their ends that distorts the transmitted signal and creates broadband Hash across the ham bands. 

4) It becomes very difficult to ensure people are not subjected to excessive RF exposure if the antenna is not up high and in the clear.

73, Ron AC7AC


 
-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of James Bennett
Sent: Monday, August 1, 2016 11:23 AM
To: Elecraft Reflector Reflector
Subject: Re: [Elecraft] Crowdfunding a 1500 watt amp - SURVEY?

Wayne, if it turns out to be a survey, put me down for a NO vote. I run my station in a HOA/CCR neighborhood and use thin, stealthy wire antennas. I’m surprised they don’t vaporize as it is with the 500 watts or so coming out of my KPA500 - on the rare occasions when I do run QRO!

Jim / W6JHB

(p.s. - and another reason for a no vote is that I’d be talking in a much higher tone if I told my XYL (KF6ZNT) if I was gonna buy a big buck amp!)



> On   Monday, Aug 1, 2016, at  Monday, 9:55 AM, Wayne Burdick <n6kr at elecraft.com> wrote:
> 
> This would be extreme overkill, IMHO. I suggest a simple survey instead.
> 
> Wayne
> N6KR
> 
> 
> On Aug 1, 2016, at 5:20 AM, Arie Kleingeld PA3A <pa3a at xs4all.nl> wrote:
> 
>> I think that crowdfunding a KPA1500 would help to get Elecraft going again on a big amp.
>> Crowdfunding would also give a good indication on how many KPA1500's you could sell in the market as it is today.
>> 
>> 73
>> Arie PA3A
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>> 
>> This list hosted by: http://www.qsl.net Please help support this 
>> email list: http://www.qsl.net/donate.html Message delivered to 
>> n6kr at elecraft.com
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html Message delivered to w6jhb at me.com

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message delivered to ron at elecraft.com



More information about the Elecraft mailing list