[Elecraft] JT65 with KX3

[Don Wilhelm]

Keith,

Have you done the Extended Temperature Compensation procedure on that KX3?
If not, you should do that.  It should reduce that drift due to 
temperature significantly.

73,
Don W3FPR

On 4/25/2016 6:34 PM, Keith Onishi wrote:
> I am experiencing some frequency drift on operating JT65 with KX3 + KXPA100. I was reported that my signal drifted 5 to 8Hz drift during my transmission and noticed almost same amount of drift during my receiving period.
> Output power was 20W with KXPA100. OSC temp shows 36C on receiving and 39C on transmitting.
>