[Elecraft] Building K2 SSB unit KSB2 version E

[Don Wilhelm]

William,

I hate it when a builder does that and then I have to repair it later in 
its life - only because the bypass jumpers I have should I need to 
remove the KSB2 for test purposes do not work.

Other than that aspect, it will cause no operational problems.
There is a greater chance of the male pins to become bent if they are on 
the RF board, and if they should, they are harder to straighten than 
male pins on the option board.

If you have *good* desoldering equipment available, I would change them, 
but lacking that, leave them as-is.

73,
Don W3FPR

On 4/24/2016 12:36 PM, William at zendamateur.nl wrote:
> Hi every body,
>
>   
>
> Posted some messages, and love the way the list works.
>
> Sorry about my English last message was just thinking on paper and that
> ended in some comments :)
>
>   
>
> I bought the K2 ¼ already build, looked good so I took the risk…
>
>   
>
> Now wat I noticed having finished today the RF board, is that the previous
> builder reversed the connectors J9 J10 and J11 he installed the mail side on
> the RF board, and the female on the KSB2 board.
>
>   
>
> I don’t think there will be a divergence.
>
>