[Elecraft] P3 vs SDRPlay on Raspberry Pi

[a45wg]

Jerry,

        This is my SDR Linux view setup. I am running on Ubuntu 14 - 64 bit.

	I use QUISK (Version 3.6.11) - to interface my KX3 to a rather old Dell Inspiron i7. To do this you need the USB Control cable (KXUSB) and a decent sound card. The sound card on the laptop was mono input only - so I use an ASUS Xonar U7 as the external Soundcard and this is connected also by USB.

The software is easy and simple to use/setup. 

Hope this helps

	Regards

		Tim
			A45WG  - Muscat
 


> On 19 Apr 2016, at 01:03, Jerry Moore <jermo at carolinaheli.com> wrote:
> 
> Did this go out? 
> 
> On April 18, 2016 1:04:42 PM EDT, Jerry Moore <jermo at carolinaheli.com> wrote:
>> I'm looking at getting a Pan adapter of sorts in the near future.  I
>> like
>> what I'm reading about SDRPlay but since I use a Raspberry Pi to
>> interface
>> my K3S I'm not sure on what software is available for that platform.
>> Their
>> website is a bit vague on it. 
>> 
>> Is anyone currently successfully using SDR play with linux/Raspberry PI
>> as
>> a panadapter and what software are you using? 
>> 
>> Ideally I'd want to be able to view the entire band (SDRPlay has 8MHz
>> bandwidth), and be able to click on a signal to change freq to that
>> signal.  I was previously able to do that with a USB SDR using a
>> windows
>> app. I no longer want to use windows because of the hardware/power
>> requirements. 
>> 
>> 
>> 
>> Thanks in advance. 
>> 
>> Jerry Moore, AE4PB
> 
> -- 
> Sent from my Android device with K-9 Mail. Please excuse my brevity.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to a45wg at sy-edm.com