[Elecraft] Velleman AS9 mat for KX3

[Grant Youngman]

It'll be fine. I built my KX3/PX3 on one of these, and added a mod to my K3. 

Grant NQ5T

Sent from my iPhone

> On Apr 17, 2016, at 3:24 PM, Bruce Nourish <w0mbt at w0mbt.net> wrote:
> 
> Hi folks,
> 
> I'm adding a 2m unit to my factory built KX3, and wanted to check if the
> specs on this mat were adequate:
> 
> http://www.velleman.eu/products/view/?country=be&lang=en&id=382422
> 
> surface resistance: ± 10^8 - 10^10 Ω/sq
> volume resistance: < 10^10 Ω/cm
> RTT (point to point): ± 10^8 - 10^10 Ω
> 
> It includes a wrist strap with a 1 MΩ resistor. The numbers look to be in
> the ball park of the examples given in the KX3 manual, but I wanted to
> check before I started poking around the guts of my very expensive toy.
> 
> Bruce
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nq5t at tx.rr.com