[Elecraft] Headset PTT Options

[Nr4c]

Both front PTT(in mic connector) and rear Phono jack are in parallel. 

I use either VOX (for contesting) and a home-made PTT switch plugged into rear jack for other use. 
-------------- next part --------------

Under the "flap" are two SMD push buttons wired in parallel with a cable to rear PTT. Box is 3.5 X 4 inches and made on my 3D printer. 

Sent from my iPhone
...nr4c. bill


> On Apr 15, 2016, at 11:34 PM, Mike Walkington <mike.walkington at gmail.com> wrote:
> 
> 
> All,
> 
> At the risk of this request being lost in the euphoric response to the K3 K-Pod..... I'm wondering what options you might be using / prefer to provide the PTT function for a K3S connected headset. I know options including (1) VOX, (2) PTT button on an alternative plugged in microphone, (3) PTT pickle switch, (4) PTT foot switch. What about your preference for enabling several (ie pickle and foot switch) of these in parallel
> 
> Mike VK1OO
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nr4c at widomaker.com