[Elecraft] K3 sound recording

[Cady, Fred]

Have a look at the sound card's Microphone properties and then click Advanced.  You will probably  be able to select a two channel input if a one channel input is currently selected.
Cheers,
Fred KE7X

For all KE7X Elecraft books, see www.ke7x.com

________________________________________
From: Elecraft <elecraft-bounces at mailman.qth.net> on behalf of HankP <pfizenmayer at q.com>
Sent: Friday, April 15, 2016 11:26 AM
To: dave at nk7z.net
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 sound recording

I do this too - BUT have not figured a way to record the SUB rx output at same time unless I made some sort of external circuit xfmr or resistors to feed LINE OUT tip and ring to a single input Maybe there is something I am missing ? This would also allow decoding RTTY from either MAIN or SUB rx . ??? Hank K7HP ----- Original Message -----
> I routinely do this... Works great for me... I use a different
> program called i-sound. It has a small footprint and works well...
> --
> 73's, and thanks,
> Dave (NK7Z)
> > Here's the question: For my K3, if I connect a line between the K3
> > LINE OUT and the PC's LINE IN, will I be able to record
> > (using software such as Audacity) all audio present in my K3
> > speaker > or headphones? I want to record CW and
> > SSB contest QSOs, to illustrate my contesting techniques.
> >
> > Thanks, Mike Goldstein VE3GFN
> > ______________________________________________________________
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to fcady at montana.edu