[Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers

[Wayne Burdick]

The mod is very simple, involving soldering one resistor onto the front panel board.

Wayne
N6KR


On Apr 15, 2016, at 6:31 AM, john at kk9a.com wrote:

> I think that most contest station use a considerable amount of cables in
> back of the rig. I have a Y on my ACC for a MicroHAM device and a Band
> Decoder and am considering adding another Y for amp control. It think that
> it is great if the K-Pod can be run off of a single cable connected
> underneath the K3S. How involved is the radio modification? I can see this
> as a convenient way to use RIT and activate the CW/SSB keyer memories.
> 
> John KK9A
> 
> Wayne Burdick n6kr at elecraft.com
> Thu Apr 14 20:38:13 EDT 2016
> message: [Elecraft] New Elecraft Product: K-Pod
> 
> Done. For most applications, a single USB cable to the radio (K3S, or a K3
> with a KIO3B module) is all that's required for combined computer data and
> audio.
> 
> We provide lots of other DC, audio, and digital I/O too, just in case you
> need it. For example, we provide a second headphone jack, second mic jack,
> and stereo speaker outputs on the back. Just in case.
> 
> No way to get rid of the DC input jack, antenna jack, and ground screw, of
> course.
> 
> I suppose the keyer paddle could go to Bluetooth?
> 
> 73,
> Wayne
> N6KR
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com