[Elecraft] Elecraft Digest, Vol 144, Issue 20
Hans J Rasmusen
oz7bq at yahoo.dk
Thu Apr 14 09:49:52 EDT 2016
Cool,
Will it work with the KX3 as well?
73
OZ7BQ, Hans Jørgen
Sendt fra min iPhone
> Den 14. apr. 2016 kl. 14.26 skrev elecraft-request at mailman.qth.net:
>
> Send Elecraft mailing list submissions to
> elecraft at mailman.qth.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://mailman.qth.net/mailman/listinfo/elecraft
> or, via email, send a message with subject or body 'help' to
> elecraft-request at mailman.qth.net
>
> You can reach the person managing the list at
> elecraft-owner at mailman.qth.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of Elecraft digest..."
>
>
> Today's Topics:
>
> 1. Re: K3s AFSK frequencies (n9tf at comcast.net)
> 2. Re: K3s AFSK frequencies (Ed Muns)
> 3. Re: K3s AFSK frequencies (Dave Hachadorian)
> 4. Re: AFSK-A with K3s (Mike Dodd)
> 5. Re: AFSK-A with K3s (Wes)
> 6. Re: AFSK-A with K3s (Wes)
> 7. Re: K3s AFSK frequencies (Ed Muns)
> 8. Re: KX3 Carrying Case (Chris Del Plato KQ2RP)
> 9. Re: AFSK-A with K3s (Mike Dodd)
> 10. Re: KX3 Carrying Case (Jock Irvine)
> 11. Re: KX3 Carrying Case (Bill Frantz)
> 12. Re: KX3 Carrying Case (Charlie T, K3ICH)
> 13. Re: KX3 Carrying Case (Walter Underwood)
> 14. KX-1 Paddle (KXPD1) (Scott Ellington)
> 15. New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (Wayne Burdick)
> 16. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (M Cresap)
> 17. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (Wayne Burdick)
> 18. Re: [Elecraft_K3] New Elecraft Product: K-Pod Control Panel
> for K3S and K3 Transceivers (Dave Cole)
> 19. Re: [Elecraft_K3] New Elecraft Product: K-Pod Control Panel
> for K3S and K3 Transceivers (Wayne Burdick)
> 20. K-Pod hands-on test opportunity; request for K-Pod
> application ideas (Wayne Burdick)
> 21. Re: [Elecraft_K3] New Elecraft Product: K-Pod ControlPanel
> for K3S and K3 Transceivers (Gary)
> 22. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (Bill)
> 23. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (Arie Kleingeld PA3A)
> 24. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (Irwin Darack)
> 25. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (Barry)
> 26. Re: New Elecraft Product: K-Pod Control Panel for K3Sand K3
> Transceivers (Doug Turnbull)
> 27. Re: New Elecraft Product: K-Pod Control Panel for K3S and K3
> Transceivers (Martin Sole)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Wed, 13 Apr 2016 15:58:28 +0000 (UTC)
> From: n9tf at comcast.net
> To: john at kk9a.com
> Cc: elecraft <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3s AFSK frequencies
> Message-ID:
> <1267124641.8946069.1460563108394.JavaMail.zimbra at comcast.net>
> Content-Type: text/plain; charset=utf-8
>
> I have had really good luck using the 500hz roofing filter and adjusting down to 400Hz with DSP for rag chewing. In contests I will adjust to 350 or even 300Hz, depending on how close signals get bunched together, with very good decode.
> I've also made adjustments to AGC, which have also been an improvement. AGC DCY - soft, AGC SLP - 6, AGC THR - 16. All other AGC settings at default. These settings in my location, seem to work the best for me so far.
> ?
> Gene, N9TF
> K3S 10057
>
> ----- Original Message -----
>
> From: john at kk9a.com
> To: "elecraft" <elecraft at mailman.qth.net>
> Sent: Wednesday, April 13, 2016 8:56:06 AM
> Subject: Re: [Elecraft] K3s AFSK frequencies
>
> The optimal band width may depend on how crowded the band is. Wide
> filtering may work well for a DXer trying to copy a super weak signal on a
> quiet band. I only use RTTY in contests when the bands are packed and I
> have had great results using very narrow roofing filters.
>
> John KK9A
>
>
> from: Dave Hachadorian
> Tue Apr 12 23:54:57 EDT 2016
>
> Current thinking is to use a fairly wide filter for RTTY. ?The
> software filters that are applied in the sound card are much
> narrower, about 50 Hz wide. ?Lately I've been using the 2.7 KHz
> roofing filter, with DSP bandwidth set to about 600 Hz.
>
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n9tf at comcast.net
>
>
>
> ------------------------------
>
> Message: 2
> Date: Wed, 13 Apr 2016 09:05:40 -0700
> From: "Ed Muns" <ed at w0yk.com>
> To: "'Mike Dodd'" <mike at mdodd.com>
> Cc: <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3s AFSK frequencies
> Message-ID: <C05EBF28EB634B3BB26D7BC702C8ED6D at h81420t>
> Content-Type: text/plain; charset="us-ascii"
>
>
> RTTY audio tones are personal choice only affecting the audio at your
> station. I can use 2125/2295 and you can use 1275/1445 when we communicate
> with each other. This is analogous to me using a CW pitch of 800 Hz and you
> using 400 Hz in the same QSO. The local audio tones we each choose have no
> impact on the other station.
>
> Two caveats:
>
> 1. With AFSK, but not FSK, transmission, using low tones, e.g., 915/1085,
> allows their second harmonic to fall within the radio's TX IF passband,
> e.g., 2800 Hz, creating QRM to the extent of the second harmonic.
>
> 2. Most radios show the SSB suppressed carrier frequency in AFSK mode
> rather than the Mark frequency which is the convention for denoting RTTY.
> The suppressed carrier frequency will differ from the RF Mark frequency by
> the amount of the local audio Mark frequency. This usually leads to
> inconsistent frequencies being communicated, for example, in a spotting
> network. The K3/K3s, however, show the RTTY Mark frequency on the dial in
> both AFSK or FSK transmit modes.
>
> With most of today's software decoders (MMTTY, 2Tone, GRITTY, Fldigi, MixW,
> etc.), an IF bandwidth of at least 500 Hz is recommended. The decoding
> algorithms make use of the sidebands outside the 170 Hz shifted frequencies
> to decrease error rate. Narrower IF filters may be appropriate in very rare
> situations where near-by strong signals can be reduced from overloading the
> IF. But, this comes at a cost of higher RTTY error rate. I seldom, if
> ever, go below 500 Hz even in the worst of QRM situations.
>
> This also means that slightly lower error rate is achievable with the K3/K3s
> Dual-Tone Filter DISabled, contrary to conventional intuition.
>
> For RTTY, AGC should be Off, another conflict with conventional thinking.
>
> Ed W0YK
> _______________________________________________________________________
>
> Mike N4CF wrote:
>
> Hello to the group. I just put my new K3s/100 into service, and have a
> question about the Mark frequency to use with AFSK. Before the K3s, I
> used a SignaLink with my KX3 and MMTTY. With that setup, I set MMTTY to
> use 915 Hz for the Mark frequency, and everything worked fine.
>
> Fiddling with the K3s and its internal USB sound card (I love that!), I
> can select various higher Mark frequencies using the PITCH button, and
> set MMTTY accordingly, and the K3 still decodes the RTTY.
>
> So my question is, what is the "standard" or common Mark frequency to
> use for AFSK on the K3? Or is it a matter of personal preference --
> which sounds better to my ears when tuning RTTY signals?
>
> Also, what bandwidth is commonly used for 170 Hz-shift RTTY? I stocked
> this K3s with four 8-pole filters, including 400 Hz and 250 Hz. The 250
> Hz filter works with RTTY, but the MMTTY X-Y scope pattern looks like I
> might be pushing things with that narrow a filter. the 400 Hz filter
> looks better.
>
> But David (I think) at Elecraft told me when I made my list of filters
> that I'd be using 2.1 kHz or 2.8 kHz for RTTY. That doesn't make a lot
> of sense to me if QRM is present. OTOH, MMTTY is decoding specific
> tones, so maybe filter width doesn't make much difference.
>
>
>
> ------------------------------
>
> Message: 3
> Date: Wed, 13 Apr 2016 09:19:10 -0700
> From: "Dave Hachadorian" <k6ll.dave at gmail.com>
> To: "Reflector Elecraft" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3s AFSK frequencies
> Message-ID: <B77AF48DC218483282F7B9C3B0F57F5B at Toshiba>
> Content-Type: text/plain; format=flowed; charset="iso-8859-1";
> reply-type=original
>
>> For RTTY, AGC should be Off, another conflict with conventional
>> thinking.
>
> Ed is correct on this, but turning AGC off on the K3 causes
> problems with loud signals due to the hard-limiting and
> distorting action of the AF Limiter. A better approach with the
> K3 is to use fast AGC, AGC SLP=0, and AGC THR as high as
> possible without causing a sound card overload warning on the
> loudest signals. For RTTY, with my usual gain settings, I find
> that AGC THR = 17 works well.
>
> Dave Hachadorian, K6LL
> Yuma, AZ
>
> .
>
>
>
> ------------------------------
>
> Message: 4
> Date: Wed, 13 Apr 2016 12:26:33 -0400
> From: Mike Dodd <mike at mdodd.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] AFSK-A with K3s
> Message-ID: <570E7339.4020804 at mdodd.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Various people wrote:
>
>
>> VOX on?
>> You need some way for MMTTY to switch the K3S between receive and transmit.
>
> Sigh.... Please excuse my frustration.
>
> My original posting was clear: MMTTY _is_ putting the K3s into transmit
> and _is_ sending tones to the built-in sound card. I can hear the tones
> when the K3s is in XMIT, but no RF comes out the antenna connector.
>
> The red TX LED on the K3s turns on, and the RF bar graph displays one
> bar, or zero watts. I can hear the tones in the K3s speaker and phones
> plugged into the rear panel.
>
> There is no need for VOX -- MMTTY puts the K3s into XMIT if PTT is
> turned on _and/or_ if VOX is turned on.
>
> Everything is fine except the K3s is not transmitting the audio from the
> built-in sound card.
>
> I'll keep trying.
>
> --
> 73, Mike N4CF
> Louisa County, VA USA
> Elecraft K3s/100
> Carolina Windom up 45'
> http://n4cf.mdodd.com
>
>
> ------------------------------
>
> Message: 5
> Date: Wed, 13 Apr 2016 09:30:58 -0700
> From: Wes <wes_n7ws at triconet.org>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] AFSK-A with K3s
> Message-ID: <570E7442.6000108 at triconet.org>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> Make sure the TX mark frequency in MMTTY is the same as what you've chosen in
> the K3.
>
>> On 4/13/2016 7:11 AM, Mike Dodd wrote:
>> Thanks to all who replied off-list to my question about choosing a Mark
>> frequency. Now on to a new question....
>>
>> Last night I was receiving RTTY using MMTTY and the AFSK-A mode on the K3s.
>> This morning I am trying to get the K3s to transmit, but not having much luck.
>>
>> I'm using the internal USB sound card in the K3s. I have successfully
>> configured MMTTY to:
>>
>> 1. Receive and decode tones from the sound card.
>> 2. Key the K3s when I click the TX button in MMTTY.
>> 3. Send tones to the K3s when the TX button is clicked. I can hear the tones
>> in the K3s speaker and headphones. If I choose a different Mark frequency in
>> MMTTY, I hear the expected tones on the K3s.
>>
>> Clearly audio tones are being sent to the K3s. But no RF comes out. I have PWR
>> set to 50W (into a dummy load), and when I hold TUNE, the RF bar graph shows
>> that power level (half scale, 5 bars).
>>
>> But when I click TX in MMTTY, and hear the tones on the K3s, the RF bar graph
>> shows 0 (one bar).
>>
>> What must I do to make the K3s transmit the audio it's receiving from MMTTY?
>>
>> Thanks in advance.
>
>
>
> ------------------------------
>
> Message: 6
> Date: Wed, 13 Apr 2016 09:33:15 -0700
> From: Wes <wes_n7ws at triconet.org>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] AFSK-A with K3s
> Message-ID: <570E74CB.1000007 at triconet.org>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> You've run into a common problem: poor reading comprehension.
>
>> On 4/13/2016 9:26 AM, Mike Dodd wrote:
>> Various people wrote:
>>
>>
>>> VOX on?
>>> You need some way for MMTTY to switch the K3S between receive and transmit.
>>
>> Sigh.... Please excuse my frustration.
>>
>> My original posting was clear: MMTTY _is_ putting the K3s into transmit and
>> _is_ sending tones to the built-in sound card. I can hear the tones when the
>> K3s is in XMIT, but no RF comes out the antenna connector.
>>
>> The red TX LED on the K3s turns on, and the RF bar graph displays one bar, or
>> zero watts. I can hear the tones in the K3s speaker and phones plugged into
>> the rear panel.
>>
>> There is no need for VOX -- MMTTY puts the K3s into XMIT if PTT is turned on
>> _and/or_ if VOX is turned on.
>>
>> Everything is fine except the K3s is not transmitting the audio from the
>> built-in sound card.
>>
>> I'll keep trying.
>
>
>
> ------------------------------
>
> Message: 7
> Date: Wed, 13 Apr 2016 10:09:58 -0700
> From: "Ed Muns" <ed at w0yk.com>
> To: "'Reflector Elecraft'" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] K3s AFSK frequencies
> Message-ID: <D33F93EAACA44C82816559686279B784 at h81420t>
> Content-Type: text/plain; charset="us-ascii"
>
> On RTTY, AF limiting doesn't occur because I run the AF Gain very low. I
> only need to hear the presence or absence of a RTTY signal.
>
> On CW, I agree, because I turn the AF Gain up higher. But, I also run a
> lower AGC THR than I would on RTTY. Thus, when changing modes between CW
> and RTTY, it is easier to leave AGC setup for CW and just turn it On or Off
> rather than go into CONFIG and change AGC THR.
>
> For RTTY, though, slow AGC will yield a lower error rate than fast AGC with
> the modern software decoders.
>
> Ed W0YK
> __________________________________________________________
>
> Dave K6LL wrote:
>
>> Ed is correct on this, but turning AGC off on the K3 causes
>> problems with loud signals due to the hard-limiting and
>> distorting action of the AF Limiter. A better approach with the
>> K3 is to use fast AGC, AGC SLP=0, and AGC THR as high as
>> possible without causing a sound card overload warning on the
>> loudest signals. For RTTY, with my usual gain settings, I find
>> that AGC THR = 17 works well.
>
> Ed W0YK wrote:
>
>>> For RTTY, AGC should be Off, another conflict with conventional
>>> thinking.
>
>
>
> ------------------------------
>
> Message: 8
> Date: Wed, 13 Apr 2016 13:20:00 -0400
> From: Chris Del Plato KQ2RP <kq2rp.cw at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KX3 Carrying Case
> Message-ID:
> <CACZQ6i8URNG9r_doXMO-Z45=RPVvc8cb=6x6t_Doo=Nq+N75GQ at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> I use a Pelican Storm iM2050. Some photos here:
>
> http://kq2rp.tumblr.com/post/102637603515/space-savers-i-picked-up-a-pair-of-these-audio
>
> http://kq2rp.tumblr.com/post/122906632025/sota-w1gm-003-mount-equinox-vt-activation
>
> 72,
> Chris KQ2RP
>
>
> ------------------------------
>
> Message: 9
> Date: Wed, 13 Apr 2016 14:06:01 -0400
> From: Mike Dodd <mike at mdodd.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] AFSK-A with K3s
> Message-ID: <570E8A89.4020905 at mdodd.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> OK, I think I have it straight now. Thanks to all, and especially to
> Gene, N9TF who emailed me off-list.
>
> For the benefit of all, here is what I learned today:
>
> I _do_ need to turn on VOX if I want to use a logging program that grabs
> the USB control port (COM5 in my case). I had MMTTY set up to key the
> rig on COM5, but it occurred to me that I didn't have my logging
> software open at that time. So PTT via COM5 is out, VOX is in.
>
> I don't normally use VOX, so my MENU: VOX gain was set to 0. Once I
> turned it up to 8 or higher, the MMTTY tones keyed the rig just fine.
>
> MENU: MIC SEL is automatically set to LINE IN when data mode AFSK-A is
> selected. This automatically reverts to my normal FP mic selection when
> I switch back to a voice mode.
>
> The mic gain must be set for 5 bars on the ALC meter. On my K3s, this is
> a MIC setting of only 2, and the fifth bar doesn't flicker as it does
> with voice, because a steady tone is being transmitted.
>
> The MIC gain control sets the LINE IN gain. This automatically reverts
> to my normal mic gain when I switch back to a voice mode.
>
> How convenient is that! THANK YOU, Elecraft.
>
> Bottom line (on my K3s, at least):
>
> * DATA MD = AFSK-A
> * VOX on
> * MENU: VOX GN = 8 - 10
> * MENU: MIC SEL = LINE IN (automatic with AFSK-A)
> * MIC gain = 2
> * PITCH = Mark frequency and shift to match those set in MMTTY
>
> MMTTY:
> * Setup, Sound card = USB audio CODEC
> * Setup, Misc device identifiers = RX 0, TX 1 (TX 0 is the PC's speakers)
> * Setup, TX, radio command, port = NONE if using logging software that
> needs the COM port
>
> I think that about covers it. Thanks again to all who offered suggestions.
>
> --
> 73, Mike N4CF
> Louisa County, VA USA
> Elecraft K3s/100
> Carolina Windom up 45'
> http://n4cf.mdodd.com
>
>
> ------------------------------
>
> Message: 10
> Date: Wed, 13 Apr 2016 16:20:34 -0400
> From: Jock Irvine <jock.irvine at gmail.com>
> To: Chris Del Plato KQ2RP <kq2rp.cw at gmail.com>
> Cc: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 Carrying Case
> Message-ID:
> <CAJOqef+9oSoRGzddzOsmDcMm+a-6QmxD0cuBQU-yAHe1QgJLeQ at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> I have an old clarinet case I'm thinking about converting to a case for the
> KX3. Where did you get the foam for your Pelican case and how do you cut
> it?
>
> 73,
>
> Jock N1JI
>
> On Wed, Apr 13, 2016 at 1:20 PM, Chris Del Plato KQ2RP <kq2rp.cw at gmail.com>
> wrote:
>
>> I use a Pelican Storm iM2050. Some photos here:
>>
>>
>> http://kq2rp.tumblr.com/post/102637603515/space-savers-i-picked-up-a-pair-of-these-audio
>>
>>
>> http://kq2rp.tumblr.com/post/122906632025/sota-w1gm-003-mount-equinox-vt-activation
>>
>> 72,
>> Chris KQ2RP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to jock.irvine at gmail.com
>
>
> ------------------------------
>
> Message: 11
> Date: Wed, 13 Apr 2016 14:07:52 -0700
> From: Bill Frantz <frantz at pwpconsult.com>
> To: Grant Youngman <nq5t at tx.rr.com>
> Cc: via Elecraft W1Pdi <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 Carrying Case
> Message-ID:
> <r470Ps-10114i-F5DE9BE01CD543E6B335C98970B8AFEE at Williams-MacBook-Pro.local>
>
> Content-Type: text/plain; charset=UTF-8; format=flowed
>
>> On 4/12/16 at 9:08 PM, nq5t at tx.rr.com (Grant Youngman) wrote:
>>
>> Rose Kopp makes an excellent storage and travel bag for the KX3
>> in a couple of different versions. Link is on the Elecraft website.
>>
>> ...
>> It's a soft bag, so you can't reasonably stand on it, drop it
>> off a cliff and expect it to survive, or fly with it as checked
>> baggage etc., but at least it doesn't weigh more than what's
>> inside it.
>
> I have one of Rose's lovely bags which I will be flying with for
> the first time later this month. I plan to put into my suitcase,
> which is what I did with the Pelican case I used before. If any
> disasters occur, I'll let you all know.
>
> 73 Bill AE6JV
>
> --------------------------------------------------------------
> Bill Frantz | There are now so many exceptions to the
> 408-356-8506 | Fourth Amendment that it operates only by
> www.pwpconsult.com | accident. - William Hugh Murray
>
>
>
> ------------------------------
>
> Message: 12
> Date: Wed, 13 Apr 2016 19:00:41 -0400
> From: "Charlie T, K3ICH" <pincon at erols.com>
> To: <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 Carrying Case
> Message-ID: <[email protected]>
> Content-Type: text/plain; charset="us-ascii"
>
> Be very careful......Those old musical instrument cases are likely to be
> haunted by the ghost of the instrument it held.
> The instrument, if not current IN the case will drive you nutz if it finds
> that you're using for something else.
> By the way Clarinets are the absolute WORST for this phenomenon.
> You'll hear those spooky tweets in the middle of the night until the two are
> re-united.
>
> 73, Charlie k3ICH
>
>
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jock
> Irvine
> Sent: Wednesday, April 13, 2016 4:21 PM
> To: Chris Del Plato KQ2RP <kq2rp.cw at gmail.com>
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] KX3 Carrying Case
>
> I have an old clarinet case I'm thinking about converting to a case for the
> KX3. Where did you get the foam for your Pelican case and how do you cut
> it?
>
> 73,
>
> Jock N1JI
>
> On Wed, Apr 13, 2016 at 1:20 PM, Chris Del Plato KQ2RP <kq2rp.cw at gmail.com>
> wrote:
>
>> I use a Pelican Storm iM2050. Some photos here:
>>
>>
>> http://kq2rp.tumblr.com/post/102637603515/space-savers-i-picked-up-a-p
>> air-of-these-audio
>>
>>
>> http://kq2rp.tumblr.com/post/122906632025/sota-w1gm-003-mount-equinox-
>> vt-activation
>>
>> 72,
>> Chris KQ2RP
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net Please help support this email
>> list: http://www.qsl.net/donate.html Message delivered to
>> jock.irvine at gmail.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html Message
> delivered to pincon at erols.com
>
>
>
> ------------------------------
>
> Message: 13
> Date: Wed, 13 Apr 2016 16:13:37 -0700
> From: Walter Underwood <wunder at wunderwood.org>
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] KX3 Carrying Case
> Message-ID: <F54396EB-01E8-483C-994F-BA2993663E6C at wunderwood.org>
> Content-Type: text/plain; charset=utf-8
>
> Dang! That is where the birdies come from. I?ve been blaming the U-Verse router all this time, and it was the clarinet case.
>
> wunder
> K6WRU
> Walter Underwood
> CM87wj
> http://observer.wunderwood.org/ (my blog)
>
>> On Apr 13, 2016, at 4:00 PM, Charlie T, K3ICH <pincon at erols.com> wrote:
>>
>> Be very careful......Those old musical instrument cases are likely to be
>> haunted by the ghost of the instrument it held.
>> The instrument, if not current IN the case will drive you nutz if it finds
>> that you're using for something else.
>> By the way Clarinets are the absolute WORST for this phenomenon.
>> You'll hear those spooky tweets in the middle of the night until the two are
>> re-united.
>>
>> 73, Charlie k3ICH
>>
>>
>>
>> -----Original Message-----
>> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jock
>> Irvine
>> Sent: Wednesday, April 13, 2016 4:21 PM
>> To: Chris Del Plato KQ2RP <kq2rp.cw at gmail.com>
>> Cc: elecraft at mailman.qth.net
>> Subject: Re: [Elecraft] KX3 Carrying Case
>>
>> I have an old clarinet case I'm thinking about converting to a case for the
>> KX3. Where did you get the foam for your Pelican case and how do you cut
>> it?
>>
>> 73,
>>
>> Jock N1JI
>>
>> On Wed, Apr 13, 2016 at 1:20 PM, Chris Del Plato KQ2RP <kq2rp.cw at gmail.com>
>> wrote:
>>
>>> I use a Pelican Storm iM2050. Some photos here:
>>>
>>>
>>> http://kq2rp.tumblr.com/post/102637603515/space-savers-i-picked-up-a-p
>>> air-of-these-audio
>>>
>>>
>>> http://kq2rp.tumblr.com/post/122906632025/sota-w1gm-003-mount-equinox-
>>> vt-activation
>>>
>>> 72,
>>> Chris KQ2RP
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:Elecraft at mailman.qth.net
>>>
>>> This list hosted by: http://www.qsl.net Please help support this email
>>> list: http://www.qsl.net/donate.html Message delivered to
>>> jock.irvine at gmail.com
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html Message
>> delivered to pincon at erols.com
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to wunder at wunderwood.org
>
>
>
> ------------------------------
>
> Message: 14
> Date: Wed, 13 Apr 2016 21:56:45 -0500
> From: Scott Ellington <k9ma at sdellington.us>
> To: elecraft at mailman.qth.net
> Subject: [Elecraft] KX-1 Paddle (KXPD1)
> Message-ID: <570F06ED.7080000 at sdellington.us>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I found it very hard to get the screw tight enough that the paddle
> didn't wobble, on two different KX-1's. Because of the position of the
> key jack on the PC board, the hole in the paddle didn't line up with the
> tapped hole in the case. (This was in the left-handed position; I
> didn't check the other one.) I carefully drilled out the paddle from
> the KX-1 side, taking care not to drill into the threaded part that
> keeps the screw from falling out. (Drill the paddle, NOT the KX-1
> case!) Then I cut a slot in the top of the screw for screwdriver. A
> tiny drop of oil on the screw threads, and it works great.
>
> 73,
>
> Scott K9MA
>
> --
> Scott Ellington K9MA
> Madison, Wisconsin, USA
>
> k9ma at sdellington.us
>
>
>
> ------------------------------
>
> Message: 15
> Date: Wed, 13 Apr 2016 20:04:50 -0700
> From: Wayne Burdick <n6kr at elecraft.com>
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Cc: "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>,
> "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com>
> Subject: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S
> and K3 Transceivers
> Message-ID: <9EA331AC-A618-4942-B76E-40D80E4A0BCE at elecraft.com>
> Content-Type: text/plain; charset=us-ascii
>
> Hi all,
>
> We've had many requests for a small control panel (or pod) as an extension to the K3 and K3S transceivers. We finally got around to it!
>
> Our new K-Pod is a very compact unit, featuring a precision tuning knob, VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches. Switch feedback is provided by activation messages on the radio's LCD, as well as the pod's own 4 indicator LEDs and audio tone generator. This multi-modal information can help maximize operating efficiency and reduce fatigue during extended operating periods.
>
> Typically the K-Pod would be placed next to a computer keyboard, allowing the operator to quickly QSY, clear RIT, enter diversity mode, change menu settings, etc., without that long stretch to reach the radio's front panel.
>
> But the K-Pod's flexible interface goes beyond substitution of the radio's knobs and switches. In effect, you can design your own customized controls for the radio.
>
> Each of the 8 programmable switches has tap and hold functions. When a switch function is used, it activates one of up to 16 user-defined command sequences that are actually stored in the radio itself, as macros. A single macro can accomplish many tasks at once, such as setting up custom splits, configuring the receiver or subreceiver for specific situations, sending transmit messages at differing code speeds, etc. Macros can be easily created or edited using K3 Utility, which runs on PC, Mac, or Linux platforms.
>
> The K-Pod has the following features:
>
> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
> * adjustable knob friction
> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
> * 8 programmable function switches, each with tap/hold functions
> * simple switch programming using K3 Utility (many examples in K-Pod manual)
> * four user-definable LEDs (three of them show knob assignment by default)
> * audio tone generator for switch feedback (can be easily turned off)
> * USB port for firmware loading and future equipment/computer control applications
> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the front panel
> * flexible power source: rear 12-V jack on the radio, DC barrel jack,
> USB port, or even through the 6-pin data cable, with minor radio modification
> (the latter method results in a single cable to the K-Pod for data and power)
> * 3 utility outputs for miscellaneous equipment control applications
> (outputs provide a low resistance to ground when turned on, usable with relays, etc.)
>
> The K-Pod's all-steel enclosure weighs a full pound for excellent stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable folding tilt stand is included to angle the panel for optimal access. There's also a 2-hole RAM mount pattern on the bottom for easy attachment to any surface.
>
> For photos and further information, please visit our K-Pod web page:
>
> http://www.elecraft.com/k-pod/k-pod.htm
>
> 73,
> Wayne, N6KR
> Eric, WA6HHQ
>
>
>
>
>
>
> ------------------------------
>
> Message: 16
> Date: Thu, 14 Apr 2016 03:21:15 +0000 (UTC)
> From: M Cresap <m.cresap at yahoo.com>
> To: Wayne Burdick <n6kr at elecraft.com>, Elecraft Reflector
> <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3S and K3 Transceivers
> Message-ID:
> <1631392426.275086.1460604075913.JavaMail.yahoo at mail.yahoo.com>
> Content-Type: text/plain; charset=UTF-8
>
> Hi Wayne
> Will the K-pod work with the K3-0?
> 73, Mike, W3IP
>
> From: Wayne Burdick <n6kr at elecraft.com>
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Cc: "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com>; "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>
> Sent: Wednesday, April 13, 2016 11:04 PM
> Subject: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers
>
> Hi all,
>
> We've had many requests for a small control panel (or pod) as an extension to the K3 and K3S transceivers. We finally got around to it!
>
> Our new K-Pod is a very compact unit, featuring a precision tuning knob, VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches. Switch feedback is provided by activation messages on the radio's LCD, as well as the pod's own 4 indicator LEDs and audio tone generator. This multi-modal information can help maximize operating efficiency and reduce fatigue during extended operating periods.
>
> Typically the K-Pod would be placed next to a computer keyboard, allowing the operator to quickly QSY, clear RIT, enter diversity mode, change menu settings, etc., without that long stretch to reach the radio's front panel.
>
> But the K-Pod's flexible interface goes beyond substitution of the radio's knobs and switches. In effect, you can design your own customized controls for the radio.
>
> Each of the 8 programmable switches has tap and hold functions. When a switch function is used, it activates one of up to 16 user-defined command sequences that are actually stored in the radio itself, as macros. A single macro can accomplish many tasks at once, such as setting up custom splits, configuring the receiver or subreceiver for specific situations, sending transmit messages at differing code speeds, etc. Macros can be easily created or edited using K3 Utility, which runs on PC, Mac, or Linux platforms.
>
> The K-Pod has the following features:
>
> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
> * adjustable knob friction
> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
> * 8 programmable function switches, each with tap/hold functions
> * simple switch programming using K3 Utility (many examples in K-Pod manual)
> * four user-definable LEDs (three of them show knob assignment by default)
> * audio tone generator for switch feedback (can be easily turned off)
> * USB port for firmware loading and future equipment/computer control applications
> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the front panel
> * flexible power source: rear 12-V jack on the radio, DC barrel jack,
> ? USB port, or even through the 6-pin data cable, with minor radio modification
> ? (the latter method results in a single cable to the K-Pod for data and power)
> * 3 utility outputs for miscellaneous equipment control applications
> ? (outputs provide a low resistance to ground when turned on, usable with relays, etc.)
>
> The K-Pod's all-steel enclosure weighs a full pound for excellent stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable folding tilt stand is included to angle the panel for optimal access. There's also a 2-hole RAM mount pattern on the bottom for easy attachment to any surface.
>
> For photos and further information, please visit our K-Pod web page:
>
> ? http://www.elecraft.com/k-pod/k-pod.htm
>
> 73,
> Wayne, N6KR
> Eric, WA6HHQ
>
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to m.cresap at yahoo.com
>
>
>
>
> ------------------------------
>
> Message: 17
> Date: Wed, 13 Apr 2016 20:35:02 -0700
> From: Wayne Burdick <n6kr at elecraft.com>
> To: M Cresap <m.cresap at yahoo.com>
> Cc: Elecraft Reflector <elecraft at mailman.qth.net>
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3S and K3 Transceivers
> Message-ID: <C208750C-726D-4A9B-A80F-D6BCACB57D79 at elecraft.com>
> Content-Type: text/plain; charset=us-ascii
>
> Short answer: yes. We have a bit more firmware to write, but this is the plan.
>
> Wayne
> N6KR
>
> ----
> http://www.elecraft.com
>
>> On Apr 13, 2016, at 8:21 PM, M Cresap <m.cresap at yahoo.com> wrote:
>>
>> Hi Wayne
>>
>> Will the K-pod work with the K3-0?
>>
>> 73, Mike, W3IP
>>
>>
>> From: Wayne Burdick <n6kr at elecraft.com>
>> To: Elecraft Reflector <elecraft at mailman.qth.net>
>> Cc: "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com>; "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>
>> Sent: Wednesday, April 13, 2016 11:04 PM
>> Subject: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and K3 Transceivers
>>
>> Hi all,
>>
>> We've had many requests for a small control panel (or pod) as an extension to the K3 and K3S transceivers. We finally got around to it!
>>
>> Our new K-Pod is a very compact unit, featuring a precision tuning knob, VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches. Switch feedback is provided by activation messages on the radio's LCD, as well as the pod's own 4 indicator LEDs and audio tone generator. This multi-modal information can help maximize operating efficiency and reduce fatigue during extended operating periods.
>>
>> Typically the K-Pod would be placed next to a computer keyboard, allowing the operator to quickly QSY, clear RIT, enter diversity mode, change menu settings, etc., without that long stretch to reach the radio's front panel.
>>
>> But the K-Pod's flexible interface goes beyond substitution of the radio's knobs and switches. In effect, you can design your own customized controls for the radio.
>>
>> Each of the 8 programmable switches has tap and hold functions. When a switch function is used, it activates one of up to 16 user-defined command sequences that are actually stored in the radio itself, as macros. A single macro can accomplish many tasks at once, such as setting up custom splits, configuring the receiver or subreceiver for specific situations, sending transmit messages at differing code speeds, etc. Macros can be easily created or edited using K3 Utility, which runs on PC, Mac, or Linux platforms.
>>
>> The K-Pod has the following features:
>>
>> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
>> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
>> * adjustable knob friction
>> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
>> * 8 programmable function switches, each with tap/hold functions
>> * simple switch programming using K3 Utility (many examples in K-Pod manual)
>> * four user-definable LEDs (three of them show knob assignment by default)
>> * audio tone generator for switch feedback (can be easily turned off)
>> * USB port for firmware loading and future equipment/computer control applications
>> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the front panel
>> * flexible power source: rear 12-V jack on the radio, DC barrel jack,
>> USB port, or even through the 6-pin data cable, with minor radio modification
>> (the latter method results in a single cable to the K-Pod for data and power)
>> * 3 utility outputs for miscellaneous equipment control applications
>> (outputs provide a low resistance to ground when turned on, usable with relays, etc.)
>>
>> The K-Pod's all-steel enclosure weighs a full pound for excellent stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable folding tilt stand is included to angle the panel for optimal access. There's also a 2-hole RAM mount pattern on the bottom for easy attachment to any surface.
>>
>> For photos and further information, please visit our K-Pod web page:
>>
>> http://www.elecraft.com/k-pod/k-pod.htm
>>
>> 73,
>> Wayne, N6KR
>> Eric, WA6HHQ
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to m.cresap at yahoo.com
>
>
> ------------------------------
>
> Message: 18
> Date: Wed, 13 Apr 2016 20:51:30 -0700
> From: Dave Cole <dave at nk7z.net>
> To: Elecraft_K3 at yahoogroups.com, Elecraft Reflector
> <elecraft at mailman.qth.net>
> Cc: "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>
> Subject: Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod
> Control Panel for K3S and K3 Transceivers
> Message-ID: <1460605890.31718.43.camel at nk7z.net>
> Content-Type: text/plain; charset="UTF-8"
>
> What a cool accessory Wayne! ?Nice work!!
> --
> 73's, and thanks,
> Dave (NK7Z)
>
> For software/hardware reviews see:
> http://www.nk7z.net
>
> For MixW support see:
> https://groups.yahoo.com/neo/groups/mixw/info
>
> For SSTV help see:
> http://groups.yahoo.com/neo/groups/MM-SSTV/info
>
>
> On Wed, 2016-04-13 at 20:04 -0700, Wayne Burdick n6kr at elecraft.com
> [Elecraft_K3] wrote:
>> Hi all,
>>
>> We've had many requests for a small control panel (or pod) as an
>> extension to the K3 and K3S transceivers. We finally got around to
>> it!?
>>
>> Our new K-Pod is a very compact unit, featuring a precision tuning
>> knob, VFO A/B/offset rocker switch, and 8 programmable tactile-
>> feedback switches. Switch feedback is provided by activation messages
>> on the radio's LCD, as well as the pod's own 4 indicator LEDs and
>> audio tone generator. This multi-modal information can help maximize
>> operating efficiency and reduce fatigue during extended operating
>> periods.
>>
>> Typically the K-Pod would be placed next to a computer keyboard,
>> allowing the operator to quickly QSY, clear RIT, enter diversity
>> mode, change menu settings, etc., without that long stretch to reach
>> the radio's front panel.?
>>
>> But the K-Pod's flexible interface goes beyond substitution of the
>> radio's knobs and switches. In effect, you can design your own
>> customized controls for the radio.
>>
>> Each of the 8 programmable switches has tap and hold functions. When
>> a switch function is used, it activates one of up to 16 user-defined
>> command sequences that are actually stored in the radio itself, as
>> macros. A single macro can accomplish many tasks at once, such as
>> setting up custom splits, configuring the receiver or subreceiver for
>> specific situations, sending transmit messages at differing code
>> speeds, etc. Macros can be easily created or edited using K3 Utility,
>> which runs on PC, Mac, or Linux platforms.
>>
>> The K-Pod has the following features:
>>
>> * high-quality weighted, soft-touch tuning knob--same as used on the
>> K3S
>> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
>> * adjustable knob friction
>> * 3-position rocker switch to assign the knob to VFO A, VFO B, or
>> RIT/XIT
>> * 8 programmable function switches, each with tap/hold functions
>> * simple switch programming using K3 Utility (many examples in K-Pod
>> manual)
>> * four user-definable LEDs (three of them show knob assignment by
>> default)
>> * audio tone generator for switch feedback (can be easily turned off)
>> * USB port for firmware loading and future equipment/computer control
>> applications
>> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack
>> beneath the front panel
>> * flexible power source: rear 12-V jack on the radio, DC barrel
>> jack,?
>> USB port, or even through the 6-pin data cable, with minor radio
>> modification
>> (the latter method results in a single cable to the K-Pod for data
>> and power)
>> * 3 utility outputs for miscellaneous equipment control applications?
>> (outputs provide a low resistance to ground when turned on, usable
>> with relays, etc.)
>>
>> The K-Pod's all-steel enclosure weighs a full pound for excellent
>> stability, yet measures only about 3.5 x 3 x 1 inches. A highly
>> stable folding tilt stand is included to angle the panel for optimal
>> access. There's also a 2-hole RAM mount pattern on the bottom for
>> easy attachment to any surface.
>>
>> For photos and further information, please visit our K-Pod web page:
>>
>> http://www.elecraft.com/k-pod/k-pod.htm
>>
>> 73,
>> Wayne, N6KR
>> Eric, WA6HHQ
>>
>> __._,_.___
>> Posted by: Wayne Burdick <n6kr at elecraft.com>
>> ?Reply via web post??????????????????????? ? ?Reply to
>> sender???????????? ? ?Reply to group????????????
>> ? ?Start a New Topic??????????? ? ?Messages in
>> this topic (1)???????????????????????
>> VISIT YOUR GROUP New Members 8
>> ? Privacy ? Unsubscribe ? Terms of Use?
>> .
>> ?
>>
>> __,_._,___
>
>
> ------------------------------
>
> Message: 19
> Date: Wed, 13 Apr 2016 21:27:56 -0700
> From: Wayne Burdick <n6kr at elecraft.com>
> To: dave at nk7z.net
> Cc: Elecraft_K3 at yahoogroups.com, Elecraft Reflector
> <elecraft at mailman.qth.net>, "elecraft at yahoogroups.com"
> <elecraft at yahoogroups.com>
> Subject: Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod
> Control Panel for K3S and K3 Transceivers
> Message-ID: <0E51372A-A0FD-4FB3-9F05-4C4646A7D599 at elecraft.com>
> Content-Type: text/plain; charset=us-ascii
>
>
>> On Apr 13, 2016, at 8:51 PM, Dave Cole <dave at nk7z.net> wrote:
>>
>> What a cool accessory Wayne! Nice work!!
>> --
>> 73's, and thanks,
>> Dave (NK7Z)
>
>
> Thanks, Dave. We had lots of input from our long-standing K-Line focus group. They pretty much got everything they wanted. I could write a novella about the rocker-switch debate ;)
>
> Wayne
> N6KR
>
>
>
> ------------------------------
>
> Message: 20
> Date: Wed, 13 Apr 2016 21:50:16 -0700
> From: Wayne Burdick <n6kr at elecraft.com>
> To: Elecraft Reflector <elecraft at mailman.qth.net>
> Cc: "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>,
> "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com>
> Subject: [Elecraft] K-Pod hands-on test opportunity; request for K-Pod
> application ideas
> Message-ID: <812CA5CC-1DA1-4974-A9E7-C8D609FB7B75 at elecraft.com>
> Content-Type: text/plain; charset=us-ascii
>
> If you're planning to go to the Visalia DX convention this weekend (dxconvention.org), please drop by our booth and give the K-Pod a test drive.
>
> We're very interested in hearing about your potential uses for the K-Pod, including proposed macros (command sequences). Some of these might make great examples for the owner's manual. In the future, we'll also support general-purpose USB functionality involving additional equipment types. All ideas and opinions welcome.
>
> 73,
> Wayne
> N6KR
>
>
>
>
> ------------------------------
>
> Message: 21
> Date: Thu, 14 Apr 2016 14:51:32 +1000
> From: Gary <vk1zzgary at gmail.com>
> To: Wayne Burdick <n6kr at elecraft.com>, <dave at nk7z.net>
> Cc: Elecraft Reflector <elecraft at mailman.qth.net>,
> <Elecraft_K3 at yahoogroups.com>, "elecraft at yahoogroups.com"
> <elecraft at yahoogroups.com>
> Subject: Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod
> ControlPanel for K3S and K3 Transceivers
> Message-ID: <570f21d7.8a44620a.4beb2.ffffe155 at mx.google.com>
> Content-Type: text/plain; charset="utf-8"
>
> Simply brilliant Wayne, it sure has that wow factor.
> Gary
>
> -----Original Message-----
> From: "Wayne Burdick" <n6kr at elecraft.com>
> Sent: ?14/?04/?2016 2:50 PM
> To: "dave at nk7z.net" <dave at nk7z.net>
> Cc: "Elecraft Reflector" <elecraft at mailman.qth.net>; "Elecraft_K3 at yahoogroups.com" <Elecraft_K3 at yahoogroups.com>; "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>
> Subject: Re: [Elecraft] [Elecraft_K3] New Elecraft Product: K-Pod ControlPanel for K3S and K3 Transceivers
>
>
>> On Apr 13, 2016, at 8:51 PM, Dave Cole <dave at nk7z.net> wrote:
>>
>> What a cool accessory Wayne! Nice work!!
>> --
>> 73's, and thanks,
>> Dave (NK7Z)
>
>
> Thanks, Dave. We had lots of input from our long-standing K-Line focus group. They pretty much got everything they wanted. I could write a novella about the rocker-switch debate ;)
>
> Wayne
> N6KR
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to vk1zzgary at gmail.com
>
>
> ------------------------------
>
> Message: 22
> Date: Thu, 14 Apr 2016 07:49:44 -0400
> From: Bill <w2blc at nycap.rr.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3S and K3 Transceivers
> Message-ID: <570F83D8.2070403 at nycap.rr.com>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> This is right up there with sliced bread. Gets control of the K3 to the
> edge of the desk - no longer have to reach across the desk.
>
> Come on June 15th!!!
>
> Bill W2BLC K-Line
>
>
>
>
> ------------------------------
>
> Message: 23
> Date: Thu, 14 Apr 2016 14:08:00 +0200
> From: Arie Kleingeld PA3A <pa3a at xs4all.nl>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3S and K3 Transceivers
> Message-ID: <570F8820.9000007 at xs4all.nl>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> K-pod:
>
> Interesting feature. Could be the first part to connect to the K4.
>
> 73
> Arie PA3A
>
> ---
> Dit e-mailbericht is gecontroleerd op virussen met Avast antivirussoftware.
> https://www.avast.com/antivirus
>
>
>
> ------------------------------
>
> Message: 24
> Date: Thu, 14 Apr 2016 08:09:45 -0400
> From: Irwin Darack <idarack at gmail.com>
> To: Wayne Burdick <n6kr at elecraft.com>
> Cc: Elecraft Reflector <elecraft at mailman.qth.net>,
> "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com>,
> "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3S and K3 Transceivers
> Message-ID:
> <CAGC7P24FYtd4C7uCMhbS56A_G_5PtAvXR6AUJxuorUxqwWxPZA at mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Wayne,
>
> Can you use the K-Pod function keys to key the CW, RTTY & DVK SSB memories
> stored in the K3S?
>
> Thanks, Irwin KD3TB
>
>> On Wednesday, April 13, 2016, Wayne Burdick <n6kr at elecraft.com> wrote:
>>
>> Hi all,
>>
>> We've had many requests for a small control panel (or pod) as an extension
>> to the K3 and K3S transceivers. We finally got around to it!
>>
>> Our new K-Pod is a very compact unit, featuring a precision tuning knob,
>> VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches.
>> Switch feedback is provided by activation messages on the radio's LCD, as
>> well as the pod's own 4 indicator LEDs and audio tone generator. This
>> multi-modal information can help maximize operating efficiency and reduce
>> fatigue during extended operating periods.
>>
>> Typically the K-Pod would be placed next to a computer keyboard, allowing
>> the operator to quickly QSY, clear RIT, enter diversity mode, change menu
>> settings, etc., without that long stretch to reach the radio's front panel.
>>
>> But the K-Pod's flexible interface goes beyond substitution of the radio's
>> knobs and switches. In effect, you can design your own customized controls
>> for the radio.
>>
>> Each of the 8 programmable switches has tap and hold functions. When a
>> switch function is used, it activates one of up to 16 user-defined command
>> sequences that are actually stored in the radio itself, as macros. A single
>> macro can accomplish many tasks at once, such as setting up custom splits,
>> configuring the receiver or subreceiver for specific situations, sending
>> transmit messages at differing code speeds, etc. Macros can be easily
>> created or edited using K3 Utility, which runs on PC, Mac, or Linux
>> platforms.
>>
>> The K-Pod has the following features:
>>
>> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
>> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
>> * adjustable knob friction
>> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
>> * 8 programmable function switches, each with tap/hold functions
>> * simple switch programming using K3 Utility (many examples in K-Pod
>> manual)
>> * four user-definable LEDs (three of them show knob assignment by default)
>> * audio tone generator for switch feedback (can be easily turned off)
>> * USB port for firmware loading and future equipment/computer control
>> applications
>> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the
>> front panel
>> * flexible power source: rear 12-V jack on the radio, DC barrel jack,
>> USB port, or even through the 6-pin data cable, with minor radio
>> modification
>> (the latter method results in a single cable to the K-Pod for data and
>> power)
>> * 3 utility outputs for miscellaneous equipment control applications
>> (outputs provide a low resistance to ground when turned on, usable with
>> relays, etc.)
>>
>> The K-Pod's all-steel enclosure weighs a full pound for excellent
>> stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable
>> folding tilt stand is included to angle the panel for optimal access.
>> There's also a 2-hole RAM mount pattern on the bottom for easy attachment
>> to any surface.
>>
>> For photos and further information, please visit our K-Pod web page:
>>
>> http://www.elecraft.com/k-pod/k-pod.htm
>>
>> 73,
>> Wayne, N6KR
>> Eric, WA6HHQ
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net <javascript:;>
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to idarack at gmail.com <javascript:;>
>
>
> --
> Irwin KD3TB
>
>
> ------------------------------
>
> Message: 25
> Date: Thu, 14 Apr 2016 05:10:32 -0700 (MST)
> From: Barry <w2up at comcast.net>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3S and K3 Transceivers
> Message-ID: <1460635832857-7616305.post at n2.nabble.com>
> Content-Type: text/plain; charset=us-ascii
>
> Is this the forerunner to the K-Watch? :-)
>
> Barry W2UP
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616305.html
> Sent from the Elecraft mailing list archive at Nabble.com.
>
>
> ------------------------------
>
> Message: 26
> Date: Thu, 14 Apr 2016 12:21:05 -0000
> From: "Doug Turnbull" <turnbull at net1.ie>
> To: "'Wayne Burdick'" <n6kr at elecraft.com>, "'M Cresap'"
> <m.cresap at yahoo.com>
> Cc: "'Elecraft Reflector'" <elecraft at mailman.qth.net>, "Hugh Bradley
> EI9GZB" <hughbradley at gmail.com>, "Alain Esquirol F8FUA"
> <f8fua.al at gmail.com>, "Brendan Minish" <ei6iz.brendan at gmail.com>,
> "Kevin T A McCarthy" <ktmccarthy436 at sbcglobal.net>
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3Sand K3 Transceivers
> Message-ID: <7F50AD2624F0446793FCA90BE5BCFF51 at DougTPC>
> Content-Type: text/plain; charset="us-ascii"
>
> Dear OM Wayne,
> Thank you for producing a control pod! It is one accessory I have
> wanted since first purchasing a K3. The Orion II had a more basic version
> of what you are about to produce.
>
> For me the most important function is the ability to access the eight
> messages stored CW and Voice memory. No longer do I have to pose my finger
> over M2 button blocking the view of the P3 and most of the other switches.
> This was always uncomfortable. As my aunt use to say you are a brick;
> this is a complement.
>
> Some people may now sit back in their Lazy-Boy reclining chairs
> listening to the mail. Life is good and Elecraft is dedicating itself to
> real improvements in its product line. I do not need a K4; Elecraft meets
> all my needs as is. Mucho gracias my friends in Elecraft. Plan for a
> good production run; I am ordering two. Life is good!
>
> &3 Doug EI2CN
>
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Wayne
> Burdick
> Sent: 14 April 2016 03:35
> To: M Cresap
> Cc: Elecraft Reflector
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3Sand
> K3 Transceivers
>
> Short answer: yes. We have a bit more firmware to write, but this is the
> plan.
>
> Wayne
> N6KR
>
> ----
> http://www.elecraft.com
>
>> On Apr 13, 2016, at 8:21 PM, M Cresap <m.cresap at yahoo.com> wrote:
>>
>> Hi Wayne
>>
>> Will the K-pod work with the K3-0?
>>
>> 73, Mike, W3IP
>>
>>
>> From: Wayne Burdick <n6kr at elecraft.com>
>> To: Elecraft Reflector <elecraft at mailman.qth.net>
>> Cc: "Elecraft_K3 at yahoogroups.com" <elecraft_k3 at yahoogroups.com>;
> "elecraft at yahoogroups.com" <elecraft at yahoogroups.com>
>> Sent: Wednesday, April 13, 2016 11:04 PM
>> Subject: [Elecraft] New Elecraft Product: K-Pod Control Panel for K3S and
> K3 Transceivers
>>
>> Hi all,
>>
>> We've had many requests for a small control panel (or pod) as an extension
> to the K3 and K3S transceivers. We finally got around to it!
>>
>> Our new K-Pod is a very compact unit, featuring a precision tuning knob,
> VFO A/B/offset rocker switch, and 8 programmable tactile-feedback switches.
> Switch feedback is provided by activation messages on the radio's LCD, as
> well as the pod's own 4 indicator LEDs and audio tone generator. This
> multi-modal information can help maximize operating efficiency and reduce
> fatigue during extended operating periods.
>>
>> Typically the K-Pod would be placed next to a computer keyboard, allowing
> the operator to quickly QSY, clear RIT, enter diversity mode, change menu
> settings, etc., without that long stretch to reach the radio's front panel.
>>
>> But the K-Pod's flexible interface goes beyond substitution of the radio's
> knobs and switches. In effect, you can design your own customized controls
> for the radio.
>>
>> Each of the 8 programmable switches has tap and hold functions. When a
> switch function is used, it activates one of up to 16 user-defined command
> sequences that are actually stored in the radio itself, as macros. A single
> macro can accomplish many tasks at once, such as setting up custom splits,
> configuring the receiver or subreceiver for specific situations, sending
> transmit messages at differing code speeds, etc. Macros can be easily
> created or edited using K3 Utility, which runs on PC, Mac, or Linux
> platforms.
>>
>> The K-Pod has the following features:
>>
>> * high-quality weighted, soft-touch tuning knob--same as used on the K3S
>> * same 400-count, ball-bearing optical encoder used in the K3 and K3S
>> * adjustable knob friction
>> * 3-position rocker switch to assign the knob to VFO A, VFO B, or RIT/XIT
>> * 8 programmable function switches, each with tap/hold functions
>> * simple switch programming using K3 Utility (many examples in K-Pod
> manual)
>> * four user-definable LEDs (three of them show knob assignment by default)
>> * audio tone generator for switch feedback (can be easily turned off)
>> * USB port for firmware loading and future equipment/computer control
> applications
>> * simple connection to K3 or K3S--uses the 6-pin RJ-style jack beneath the
> front panel
>> * flexible power source: rear 12-V jack on the radio, DC barrel jack,
>> USB port, or even through the 6-pin data cable, with minor radio
> modification
>> (the latter method results in a single cable to the K-Pod for data and
> power)
>> * 3 utility outputs for miscellaneous equipment control applications
>> (outputs provide a low resistance to ground when turned on, usable with
> relays, etc.)
>>
>> The K-Pod's all-steel enclosure weighs a full pound for excellent
> stability, yet measures only about 3.5 x 3 x 1 inches. A highly stable
> folding tilt stand is included to angle the panel for optimal access.
> There's also a 2-hole RAM mount pattern on the bottom for easy attachment to
> any surface.
>>
>> For photos and further information, please visit our K-Pod web page:
>>
>> http://www.elecraft.com/k-pod/k-pod.htm
>>
>> 73,
>> Wayne, N6KR
>> Eric, WA6HHQ
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to m.cresap at yahoo.com
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to turnbull at net1.ie
>
>
>
> ------------------------------
>
> Message: 27
> Date: Thu, 14 Apr 2016 15:26:08 +0300
> From: Martin Sole <hs0zed at gmail.com>
> To: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] New Elecraft Product: K-Pod Control Panel for
> K3S and K3 Transceivers
> Message-ID: <570F8C60.3010000 at gmail.com>
> Content-Type: text/plain; charset=windows-1252; format=flowed
>
> It looks a bit heavy!
> I'll wait for the K-Pod air!
>
>
> Martin, HS0ZED
>
>
>> On 14/04/2016 15:10, Barry wrote:
>> Is this the forerunner to the K-Watch? :-)
>>
>> Barry W2UP
>>
>>
>>
>> --
>> View this message in context: http://elecraft.365791.n2.nabble.com/New-Elecraft-Product-K-Pod-Control-Panel-for-K3S-and-K3-Transceivers-tp7616296p7616305.html
>> Sent from the Elecraft mailing list archive at Nabble.com.
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to hs0zed at gmail.com
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft at mailman.qth.net
> http://mailman.qth.net/mailman/listinfo/elecraft
> You must be a subscriber to post.
> Elecraft web page: http://www.elecraft.com
>
> ------------------------------
>
> End of Elecraft Digest, Vol 144, Issue 20
> *****************************************
More information about the Elecraft
mailing list