[Elecraft] AFSK-A with K3s

[Wes]

You've run into a common problem: poor reading comprehension.

On 4/13/2016 9:26 AM, Mike Dodd wrote:
> Various people wrote:
>
>
>> VOX on?
>> You need some way for MMTTY to switch the K3S between receive and transmit.
>
> Sigh.... Please excuse my frustration.
>
> My original posting was clear: MMTTY _is_ putting the K3s into transmit and 
> _is_ sending tones to the built-in sound card. I can hear the tones when the 
> K3s is in XMIT, but no RF comes out the antenna connector.
>
> The red TX LED on the K3s turns on, and the RF bar graph displays one bar, or 
> zero watts. I can hear the tones in the K3s speaker and phones plugged into 
> the rear panel.
>
> There is no need for VOX -- MMTTY puts the K3s into XMIT if PTT is turned on 
> _and/or_ if VOX is turned on.
>
> Everything is fine except the K3s is not transmitting the audio from the 
> built-in sound card.
>
> I'll keep trying.
>