[Elecraft] K3 radio no receive no transmit

[Russ Tobolic]

Do you have the new KSYN3A?  I just experienced a similar problem but tapping on the case didn't solve anything. Elecraft support determined I have a bad synthesizer. Russ, N3CO

      From: John K9UWA <john at johnjeanantiqueradio.com>
 To: Mailman <elecraft at mailman.qth.net> 
 Sent: Thursday, April 7, 2016 9:42 PM
 Subject: [Elecraft] K3 radio no receive no transmit
   
My K3 is acting up a bit. No Receive No Transmit. I operate this radio 
remotely so all I can tell you is that it appears to be all working as per the 
HRD screen I am looking at. The radio appears to switch to transmit and I 
hear the monitor CW being sent but no output on the wattmeter.  The only 
noise coming from the radio is inter radio noise it the volume is turned to 
max. A slight TAP on the top of the case and the radio goes back into 
perfect normal operation. I am guessing that some plug someplace inside 
the radio isn't making proper contact. 

Does anyone have any idea which plug and its location?

Thanks
John k9uwa
John Goller, K9UWA & Jean Goller, N9PXF 
Antique Radio Restorations
k9uwa at arrl.net
Visit our Web Site at:
http://www.JohnJeanAntiqueRadio.com
4836 Ranch Road
Leo, IN 46765
USA
1-260-637-6426

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to erusst at att.net