[Elecraft] low IF out on K3

[Art Hejduk]

Enrico,

How old is your K3?  I believe they made a change to increase the output on
the "newer" units.  I'm not sure which serial number this began on, but
mine has the higher output, and it is serial number 43XX.

73,
Art  WB8ENE

On Thu, Apr 7, 2016 at 3:55 PM, Enrico Lorenzoni IU3AZC <iu3azc at gmail.com>
wrote:

> hello everyone,
> I just compared my k3 with a friend's one and my IF out is much lower than
> his k3.
> I suspected it when listening on a softrock, but now I can see a
> difference like 10 or 20db off.
>
> So I inspected my k3 and the IF out connector is fine. Multimeter says 0
> ohms between bnc contacts and P86 pins on motherboard.
> What can I check next?
> Anyone did fix this same issue?
>
> thanks
>
> Enrico IU4AZC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to valvetbone at gmail.com
>