[Elecraft] Internal Speaker Problem

[Don Wilhelm]

Mark,

The proper answer is "maybe".
Check the audio amplifier for the speaker by plugging your headphones 
(or external speakers) into the speaker jack in the back of the K3.
If you have audio there, the speaker amplifier is working and there is 
not a problem with the DSP board or Front Panel board.

If you do get audio through the rear speaker jack, then check that you 
have the internal speaker plugged in completely and correctly.

73,
Don W3FPR

On 4/4/2016 10:41 PM, pastormg2 at verizon.net wrote:
> Good Evening,
> This is mark griffin, KB3Z. I forgot to write the message in text. Here we go again!!! I installed my KDVR a few months ago. And for some reason the internal speaker does not work. It has been suggested that I don't have the DSP board seated correctly or perhaps the front panel is not seated correctly. When I plug headphones into the headphone jack I get audio into the headphones. Also, the KDVR works also. Would the KDVR still work even though the DSP board or front panel may not be seated correctly? Thanks for any advice I receive. Mark Griffin, KB3Z
>