[Elecraft] Raspberry PI 3 and K3

[John Pitz]

It is interesting that you mention this, I am quite a ways into a
similar project.  I have a Pi3 connected to a 7" touch screen display.
I also have a USB soundcard setup on it and this last weekend made a
contact using my KX3 and fldigi to make a very clumsily executed on my
part contact with a HAM in Florida.  I have found that a stylus makes
life much easier with tiny displays.  The Pi is an aweful lot of
computer for so little money.


On Mon, 2016-04-04 at 11:08 -0600, Doug Person via Elecraft wrote:

> Here's an interesting observation - just setup my newly received 
> Raspberry Pi 3.  After setting it, which was very simple, I selected 
> fldigi and flrig from the software directory.  After the installed I 
> plugged in my K3 USB cable and setup fldigi just as I would on any other 
> linux computer.  Slightly amazed that it worked great.  So, imagine - a 
> $39 computer that can run any linux ham software and its smaller than 
> your hand.
> 
> Doug -- K0DXV
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to crustacean at brig-elec.com
>