[Elecraft] K3S USB and MMTTY running SPLIT additional

[Jim Sheldon]

I should have been more specific in my post on observations.  First off, 
I have been getting a whole bunch of replies with "tutorials" on how to 
run split, how RTTY works, etc.  These are absolutely not needed.  I've 
been on RTTY since first licensed back in 1963, I know RTTY is LSB, etc. 
  I also have been using MMTTY since Mako first wrote it and know how to 
set it up.  I'm running true FSK keying via the K3S accessory connector 
and a COM port.  This works fine.

The K3S (note S, not K3) internal USB sound card outputs stereo, this I 
also know.  The 64 bit version of Windows 7 Professional which I have 
running on an HP 6300 small form factor computer with an Intel Core i5 
processor (true quad core) at 3.5 GHz and 16 gig of RAM.

MMTTY does NOT recognize the K3S sound card through the USB setup on the 
above computer as being stereo and one can not select which audio stream 
from the K3S is used by the program.  That is a problem with Windows 7 
Professional, not MMTTY.

I can easily use the sound card in the computer, but then I lose much of 
the single cable functionality of the K3S built in USB.

I was merely observing that MMTTY WAS recognizing both streams 
simultaneously and COULD apparently decode both.

Thanks for the newbie tutorials guys, but they are not needed.

Jim - W0EB