[Elecraft] WSPR

[Peter Eijlander (PA0PJE)]

You should set the transceiver's dial to 14095.6 USB. Then, as the audio 
tone generated is 1500 Hz, the actual transmit frequency will be 14097.1
On receive same story: receiving with the dial set to 14095.6 a 1500 Hz 
tone will be audible. That's it...

73,
Peter

Op 2016-04-02 21:54 schreef Aaron K5ATG:
> I'm wondering if I am missing something. I'm trying to run WSPR with my K2.
> I'm using a Signalink USB and have the transmit set at 140971 and receive
> at 14956 (as per WSPR instructions). My PC clock is in sync with the WSPR
> program, and I have the AF Gain at about 1 db. I have it set at 20%
> Transmit. The Idle box is unchecked and the K2 is set at USB.  I see a
> bunch of signals on the waterfall, but I am not receiving or transmitting
> any signals.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to pa0pje at xs4all.nl
>