[Elecraft] No power out and no receive

[Eric Swartz - WA6HHQ, Elecraft]

One correction to Ron's posting:  The Sub Rx's  KSYN3a (if you have the 
sub-receiver installed) may have a blinking green status light until the sub is 
actually turned on for the first time from the K3 front panel.

73,
Eric
/elecraft.com/

On 9/30/2015 8:03 AM, Ron D'Eau Claire wrote:
> Anything that disables the synthesizer will produce those symptoms. Check
> the TMP cables that connect the KREF3 to the KSYN3 and to the K3 RF board to
> make sure they are all properly seated. If your K3 has the newer KSYN3A
> synthesizer board (mounted on the front panel shield with the KREF3) you
> should see a green LED glowing brightly when you look down from the top
> (it's on the back of the board near the top edge). If it's blinking the
> synthesizer is NOT locked and will produce the symptoms you are
> experiencing. Normally it will be glowing steadily.
>
> 73, Ron AC7AC
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to eric.swartz at elecraft.com
>