[Elecraft] [K3] Test Mode TX and TX Monitor?

[Merv Schweigert]

Mine registers anything it wants in non transmit mode,  many times pegs 
the swr chart, other
times 2 or 3 to 1..  normal from what I see.

Merv K9FD/KH6   WH2XCR
> I did something tonight I have not done before since having my P3 TX Monitor in place.  I was testing the adjustment on my paddle in TX Test Mode and I noticed that the P3 acted as normal — that is, no signal — with the exception of the bar graph for SWR.  The bar graph registered an SWR of 3:1 (normally about 1.1:1) in response to key down while in Test Mode.  Yet, the bar graph acts normally showing the correct SWR in TX mode (not test).
>
> I would expect that the P3 would not register anything while in Test Mode TX — just like before hooking up the TX Monitor.
>
> So, this is a little anomaly that others see and is this normal behavior?
>
> Thanks,
> 73, phil, K7PEH
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k9fd at flex.com