[Elecraft] K144XV & KRX3A, install which first in K3s?
Carl Jón Denbow
carl at n8vz.com
Tue Sep 22 12:41:49 EDT 2015
OK, Don, I've run into a little confusion: the bottom of page 11 of the
K144XV instructions has details about installing a new back panel with
an ANT 3 hole. However, I don't have a replacement panel and my K3s back
panel already has an ANT 3 hole. A few pages earlier the instructions
have a note to skip over some items if you have a K3s, but this is not
one of them; in fact, the skip instructions say to resume at this
point. It seems to me that I actually need to resume somewhere down
the page on page 12, but I'm having a little trouble figuring out
where. Thanks for any further help you can give me. -- 73 de Carl, N8VZ
Don Wilhelm wrote:
> Carl,
>
> The KRX3 must go in first. If you think about it, the K144XV fits
> above the KRX3, so if you install the K144XV first, you will not be
> able to get the KRX3 in place below it.
> The K144XV instructions page 11 3rd checkbox tells you when to install
> the KRX3 *if* you had removed it. This is the time to install the KRX3.
>
> 73,
> Don W3FPR
>
>
> On 9/21/2015 2:27 PM, Carl Jón Denbow wrote:
>> I seem to have a dilemma. I'm getting ready to install both the
>> K144XV and the KRX3A in my new K3s. The respective instructions each
>> say to remove the other first. I've read through both manuals, and
>> I'm still confused on the best order to do these two operations. I
>> put my KRX3A together last night, and it's ready to install after I
>> do the other things required inside the K3s itself. If anyone on
>> this list has installed these two modules at the same time, I would
>> very much appreciate their insights before I plunge forward. Might
>> save me from having to backtrack because I did a particular step
>> prematurely. Thanks for any help anyone can give me.
>>
>
--
=================================================
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
carl at n8vz.com
www.n8vz.com
EM89wh
IRLP 4533 Echolink 116070
PSK and JT65 Forever!
=================================================
More information about the Elecraft
mailing list