[Elecraft] KX3 (or, K3) 2-meter solid-state amplifier

[Kevin Stover]

I think I read in one of the higher power amps write up that he uses a 
company called http://www.frontpanelexpress.com/ to make his cabinets. 
I'll bet it's like PCB express.

On 9/21/2015 6:21 PM, Phil Wheeler wrote:
> Kevin,
>
> At the link shown earlier there is this info: " Drawings for making 
> the chassis parts are here: front panel 
> <http://www.w6pql.com/2m/80w-amp/photo-07.jpg> rear panel 
> <http://www.w6pql.com/2m/80w-amp/photo-08.jpg> bottom 
> <http://www.w6pql.com/2m/80w-amp/photo-09.jpg>cover 
> <http://www.w6pql.com/2m/80w-amp/photo-09.jpg>. For heat sink 
> material, a heat sink with a base thickness of .300 or better should 
> be used. The size of the one I used was 8" long x 5.375" wide."
>
> Not my cup of tea; not into 2 m from my location (was 20 years ago, 
> and broke my pick due to poor location).
>
> 73, Phil W7OX
>


-- 
R. Kevin Stover
AC0H
ARRL
FISTS #11993
SKCC #215
NAQCC #3441