[Elecraft] Possible KXUSB to K2 KIO2 adapter?

[Don Wilhelm]

Rob,

Yes, that is possible.  Get a stereo jack to replace the DE-9 connector 
on the computer end.
Connect the red wire to the ring of the jack, the green wire to the tip, 
and the black wire to the shell.

If this is only a temporary measure, get a DE-9 male connector in 
addition to the jack and make up an adapter.
The ring of the jack connects to pin 2 of the DE-9, the tip to pin 3 and 
the shell to pin 5.
Plug the existing DE-9 female into your male adapter and plug the KUSB 
into the stereo jack.

73,
Don W3FPR


On 9/20/2015 12:19 AM, Robin Bayer wrote:
> After computer upgrade, my Serial board no longer functions with my K2.
>
> Would it be possible to build an adapter using my KXUSB to the KIO2 special
> cable on the K2?
>