[Elecraft] Digital Modes and K3S

[Bob McGraw - K4TAX]

Are you in USB mode or TX Data mode on the radio?

I use TX Data very successfully.  And when I work AFSK I do switch to 
ALT mode which would be LSB mode in TX Data.  Otherwise, TX Data us a 
USB mode.  The nice thing about using TX Data mode is that it negates 
the COMP and EQ values.  When going back to SSB then the COMP and EQ 
values are retained.

73
Bob, K4TAX
K3S s/n 10,163

On 9/16/2015 2:18 PM, KE1B wrote:
> I had this working, but now can’t figure out how I did it, cuz it’s not working again.
>
> Running Windows 7, N1MM+, K3S connected via USB.
>
> CW and SSB work fine, including macros.
>
> On RTTY (MMTTY), if I hit any macro key, the radio keys up (PTT), but there is no diddling. At that time, I see the characters being sent in the Digital Window, and the XY scope is apparently showing my transmitted signal. I just get a pure carrier.
>
> On PSK (MMVARI), if I hit a macro key, the radio keys up (PTT), and the characters show up in the Digital Window, but again there is apparently no audio getting from the computer to the radio.
>
> In the Configurer, I have selected the K3S Codec as the output device for the radio.
>
> I have tried lots of variations in ports and AFSK/FSK and such, to no avail. What should I be checking?
>
> Rich KE1B
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rmcgraw at blomand.net
>
>
>