[Elecraft] K3 / K3S Station setup question

[kg9hfrank at gmail.com]

Jim / all
I found these small 3” disks at the local ACE Hardware it assists the table to glide across the floor…
I needed 6 to make it easy to glide the desk.

Frank KG9H


> On Sep 15, 2015, at 11:15 AM, Jim Brown <jim at audiosystemsgroup.com> wrote:
> 
> On Tue,9/15/2015 6:20 AM, Cady, Fred wrote:
>> Build it so you can get behind the desk to connect things up.  You should see the back of my desk!
> 
> YES!  I have the same problem -- my desk is anchored to the wall, with a few inches between desk and wall for cables to pass to shelves above and below. If I were starting from scratch, I would put the desk and shelves on wheels that I could get behind.
> 
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to kg9hfrank at gmail.com