[Elecraft] Any experience using a delta Loop on KX3 & KXPA100 w tuners

[bruce hunter]

Hello Dwight,
Sorry for the delay, your email got moved and I've been busy as s.e.s. 
W6D for Route 66 On The Air.
I used my KX3 with no amp and a 75meter wire loop at about 20ft for 
Field Day and went coast to coast and border to border at 10w.
Tuner situation - I run a Yaesu FT 950 and don't use the onboard tuner 
because I get much better results with an MFJ 969 manual tuner, which 
will almost tune lawn furniture. I use the ATU in the KX3 (which 
apparently *will* tune lawn furniture) because it gets better results 
than the MFJ 969. Sorry, can't help with the amplifier part of the equation.
73,
Bruce W6WW


On 9/12/2015 1:39 PM, dwightand1 wrote:
> Hello
>
> I have been using the KX3 and  KXPA100 with a Jackite pole as a 
> vertical off my deck.   I ran it with a single counterpoise using a 
> 9:1 balun.  Also direct, ie no balun, with 3 to 4 radials.
> Surprisingly good results in very poor band conditions.  I have a 
> choke on my coax close by my radio.
>
> I've been thinking about trying a delta loop with the apex on the top 
> of the Jackite, about 30' on each side.
>
> Anyone try using a delta loop with the KX3&internal tuner? What about 
> KXPA100 and internal tuner?  Any issues using the tuner?
>
> The ATU's in both Elecraft units can tune anything, very fun to use.
>
> Much Regards,
> Dwight
> WM5F
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to bhunter3 at mindspring.com
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2015.0.6125 / Virus Database: 4419/10627 - Release Date: 
> 09/12/15
>
>