[Elecraft] K3/K3S Pin 1 question

[Brian Denley]

I agree with Don as well here.  I use a Behringer Shark DSP110 which has both balanced XLR and 1/4 inch mono inputs and outputs that can be set to line or mic levels.  It also provides a noise gate and mic gain if you need it.  You can stay balanced as far as you want.   It was ~$50 used.
Brian 
KB1VBF
Sent from my iPad

> On Sep 14, 2015, at 5:52 PM, Jim Brown <jim at audiosystemsgroup.com> wrote:
> 
>> On Mon,9/14/2015 10:25 AM, Don Wilhelm wrote:
>> I would preserve the balanced configuration through your switchbox and only connect the mic low to ground at each radio's plug.
> 
> As usual, we agree. :)
> 
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to b.denley at comcast.net