[Elecraft] KX3 macro for less than one watt?

[Wayne Burdick]

Hi Ron,

Sending

   K22;PC005;

will set the KX3 to 0.5 watts (for example).

The trick here is using the "K2" meta command, originally written for the K2. The default is K20 mode (no modification of commands). But if you send K22; then some commands will behave differently, including the PC command, which goes from 1-watt increments to 0.1-W increments. K22 mode also adds a 4th digit to the PC command. What this does is left as an exercise for the reader. (See the K3S/K3/KX3 programmer's reference.)

73
Wayne
N6KR



On Sep 11, 2015, at 8:36 PM, "w7hd at msn.com" <w7hd at msn.com> wrote:

> Is there a programming command to set the KX3 power to less than one watt?
> PC001; seems to be the lowest level you can get, according to the programming guide.
> The NAQCC sprints often use power levels that must be less than one watt, which means a manual setting on the front panel.
> 
> I love macros !!!
> 
> Ron W7HD
> -- 
> OMISS#9898 Linuxuser#415320 NAQCC#7587
> My homepage: http://w7hd.net
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to n6kr at elecraft.com