[Elecraft] [KPA500] Reduced band sensitivity when in OPER

[Dwayne Rohmer]

Correction to the previous post

Chris,

You may want to check your coax connections between the rig, KPA500, and 
KAT500.

The KPA500 should be between the rig and *K**AT**500* with regard to the RF.

The KAT500 should be between the rig and the KPA500 with regard to the 
DB9 cables. This is so that the KAT500 can interrupt the KPA500 under 
high SWR conditions.

Sorry for the error.

73,

Dwayne WV5I

On 9/9/2015 7:50 PM, Dwayne Rohmer wrote:
> Chris,
>
> You may want to check your coax connections between the rig, KPA500, 
> and KAT500.
>
> The KPA500 should be between the rig and KPA500 with regard to the RF.
>
> The KAT500 should be between the rig and the KPA500 with regard to the 
> DB9 cables. This is so that the KAT500 can interrupt the KPA500 under 
> high SWR conditions.
>
> 73,
>
> Dwayne WV5I
>
>
> On 9/9/2015 7:18 PM, Chris Johnson wrote:
>> I have a KAT500 between it and my rig.
>