[Elecraft] DSP REV C and D

[GRANT YOUNGMAN]

Not necessarily.  I have a “C” board in my K3, but I also have the LPF installed.  If you are the original owner of the radio, then I suppose you’d know if you installed the LPF board or not.  If you bought the radio 2nd hand, then you’ll need to see if the LPF board was or was not installed by the previous owner.

Grant NQ5T


> On Sep 8, 2015, at 12:33 PM, Rich <rwnewbould at comcast.net> wrote:
> 
> Would I be correct that the difference between DSP C and D is that C is lacking the LPF rolloff at 4 Khz?
> 
> Assuming I am correct should I expect better rx audio quality with D?
> 
> Rich
> K3RWN
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to nq5t at tx.rr.com