[Elecraft] K2 Options

[lmarion]

I have built every K2 option there is. Definitely the KDSP2 is the way to 
go.  If you are going CW only, the QRO options are not needed, unless you 
are severely antenna restricted.


                                                                 Leroy AB7CE 
K2 serial number 40

-----Original Message----- 
From: Dauer, Edward
Sent: Sunday, September 06, 2015 9:45 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] K2 Options


Still exploring options for a backup rig for the K3.   (The KX3 stays at the 
other QTH.)   Began looking into the K2.  The build sounds interesting.  One 
choice that has to be made is between the KDSP2 DSP filter and the KAF2 
audio filter and clock.  Apparently it has to be one or the other - not 
both.  Any advice about that choice?  Anyone who chose one now wish they had 
done the other?  In case it matters I plan to operate CW only, and would 
probably go for the internal KPA100 and the external KAT100.  Thanks for 
whatever counsel might be offered . . .

Ted, KN1CBR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to lmarion at mt.net