[Elecraft] K3S IMD Questions

[Don Wilhelm]

Anyone who does such testing should also include in the report(s) the 
power supply voltage as seen by the K3S alternate VFO B display.
Lower power supply voltages will have worse IMD than voltages that are 
higher.
Running the K3 or K3S with a power supply voltage above 14.3 volts will 
improve the IMD substantially.

73,
Don W3FPR

On 9/1/2015 1:44 PM, Ian White wrote:
> I found very much the same as Rick did, with a completely different test
> setup (SDR-IQ).
>
> The details vary somewhat with frequency and supply voltage but the
> three main features reported by Rick remain the same:
>
>