[Elecraft] K3S trouble doing PSK31 w DM780

[Chris Hallinan]

Are you getting any power output at all?  Switch the meter from ALC to
power output and see if you have anything.  I had a similar problem and
ended up using USB mode, but then I had to change the CONFIG to select the
rear panel line in (I use the signal link USB through line-in and
line-out.) I don't know about your K3S and USB.  But I'm sure it's
misconfigured somewhere.  Good luck.

-Chris
K1AY


On Mon, Aug 31, 2015 at 11:44 PM, Steve Muenich <srmuenich at gmail.com> wrote:

> Hi all,
>
> It's my first time posting to this group as I recently got my K3S #10121
> on the air.  I have been really enjoying playing with it on SSB and CW.
> I use HRD as my logging and rig control. But over the last couple of
> nights I have been trying to get on the digital modes, mostly PSK31 at
> first.
> Im using the USB interface to PC, I have good rx and I am decoding PSK
> fine. Problem is when I go to TX. I have PTT with rf power out and monitor
> audio as I hear data but No ALC indication at all. K3S is in Data mode.
> I hear good and when I try to answer CQ no one ever responds.
>
> Any suggestions as to what I am doing wrong?
>
> Thanks in advance.
>
> 73
> Steve, NA5C
>
> ______________________________________________________________
> Elecraft mailing list
>