[Elecraft] K3 has no output Help!

[Vic Rosenthal 4X6GP/K2VCO]

Check TX INH in the CONFIG menu. It should be OFF unless you are using 
that feature.

No, it's not TEST mode, because the TX light is on.

73,
Vic, 4X6GP/K2VCO
Rehovot, Israel
http://www.qsl.net/k2vco/

On 31 Oct 2015 20:46, averill at mchsi.com wrote:
>
>
>
>
>
>
>
> My K3 has stopped putting out a CW signal!
> Red transmit light comes on.No reading on SWR meter.Rcv. is working fine.VOX is turned on.Antennas are OK.
> HELP!  Any suggestions?
> Randy KK4BNC
>
> Sent from my Verizon 4G LTE Smartphone