[Elecraft] P3 SVGA Self changing tracking mode

[Rick Prather]

Rick,

I haven’t been able to duplicate what you describe.

73,
Rick
K6LE

On Fri, Oct 30, 2015 at 8:26 AM, Rick WA6NHC <happymoosephoto at gmail.com>
wrote:

> Hello all,
>
> I'm seeing an issue on the SVGA side of the P3.
>
> In order to utilize the screen space more effectively I often use the
> CENTER control to shift my TX frequency to the left side up the display
> (when the DX is listening up) to show those calling on the right side of
> the display.   [The alternative is to use the SPAN control, but much of the
> screen is under utilized.]
>
> This works great until I QSY or adjust the RX frequency.  At that point
> the SVGA display no longer synchs with the P3 display so this is limited to
> only the SVGA portion.  The shaded areas shift to anywhere on the SVGA
> display (1024x768), sometimes even swapping sides of the display.  I have
> to revert to watching the P3 only.
>
> It stays with an incorrect display on the SVGA until I tap the fixed/track
> tune in the menu.  Then it works properly, until the next time I slide the
> display to the side.
>
> I've not seen this mentioned on the list.  Can someone else confirm this
> behavior?  It appears to be a bug.
>
> I've reloaded the entire P3 firmware package, this situation remains.  The
> P3 is functioning properly, this is solely an SVGA issue.
>
> Thanks in advance,
> Rick wa6nhc
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to rick.prather at gmail.com
>