[Elecraft] KX3 to Computer

[martin waller]

Hi Lyle

Many thanks for the complete explanation. I'll give it a whirl.

Martin
G0PJO

Sent from my iPhone

> On 28 Oct 2015, at 21:44, Lyle Johnson <kk7p4dsp at gmail.com> wrote:
> 
> Disable the mic buttons (see menu items) and use VOX (or a serial port command) to switch between Tx and Rx depending on your program's features.
> 
> And be sure to set MIG GAIN to ZERO then gradually increase it to get the 4-5 bars of ALC indication.  If the MIC GAIN is too high for the computer's audio level, the ALC bar graph and the transmit audio levels may not respond properly (this is a bug on my short list to fix).
> 
> 73,
> 
> Lyle KK7P
> 
>> Good question...I have been holding the microphone infront of the PC speaker in the interim as that worked as a temporary solution.
>> ...
>> 
>>  What is the easiest way to connect the KX3 to a computer for RTTY, PSK31 &
>> SSTV...
>> 
>> So how do you connect the audio for transmitting?
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to martin at the-wallers.net