[Elecraft] K3 Filter Settings Main and Sub Receiver Track For Data Mode Only

[Guy Olinger K2AV]

I have a K3. Did not have the problem in 5.33. Do not have the problem in
5.38. I am unable to duplicate your problem. In Data A, and b SEt width
control varies width in sub RX while main RX stays the same.

Your report sounds like you are in diversity mode. My frequency shows as
1.814.9 The right decimal point is blinking. Is your right decimal point in
the VFO A display blinking?

I have not had bench time to install the KSYN3A mods. What is your status
with the SYN mods?

73, Guy

On Fri, Oct 23, 2015 at 3:39 PM, Elliott Lawrence <wa6tla at icloud.com> wrote:

> Changing to MCU 5.38 did not solve the problem.  Need to contact K3
> support!
> 73
> Elliott WA6TLA
>
> On Oct 23, 2015, at 10:57 AM, Elliott Lawrence <wa6tla at icloud.com> wrote:
>
> > Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data
> mode only, setting the bandwidth of the main receiver also causes the
> subreceiver bandwidth to track and be identical. The BSET control XFIL for
> Data has no effect.  In CW and SSB modes the main receiver XFIL can be
> adjusted and the subreceiver XFIL changed independently using BSET.  This
> was definitely not the case for previous firmware versions.   This
> operation is not band dependent.
> >
> > I have checked all of  the firmware notes and the latest K3S manual and
> can’t find anything to explain this operation.  Am I missing something?  Is
> this a new and unwanted improvement?
> >
> > Thanks for your comments.
> > 73
> > Elliott WA6TLA
> >
> >
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:Elecraft at mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to wa6tla at icloud.com
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av.guy at gmail.com
>