[Elecraft] K3 Filter Settings Main and Sub Receiver Track For Data Mode Only

[Elliott Lawrence]

Changing to MCU 5.38 did not solve the problem.  Need to contact K3 support!
73
Elliott WA6TLA

On Oct 23, 2015, at 10:57 AM, Elliott Lawrence <wa6tla at icloud.com> wrote:

> Using the latest K3 firmware MCU 5.35 for my K3 (not K3S). In the Data mode only, setting the bandwidth of the main receiver also causes the subreceiver bandwidth to track and be identical. The BSET control XFIL for Data has no effect.  In CW and SSB modes the main receiver XFIL can be adjusted and the subreceiver XFIL changed independently using BSET.  This was definitely not the case for previous firmware versions.   This operation is not band dependent.
> 
> I have checked all of  the firmware notes and the latest K3S manual and can’t find anything to explain this operation.  Am I missing something?  Is this a new and unwanted improvement?
> 
> Thanks for your comments.
> 73
> Elliott WA6TLA
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to wa6tla at icloud.com