[Elecraft] KRC2 rs232 to cpu not working

[Gordon LaPoint]

Byron,
      Thanks!   I will check my serial cable pinout, I think I'm using a 
straight thru with all pins connectd.  I may have to make a cable with 
just the pins connected that the manual specifies.

Gordon - N1MGO

On 10/22/2015 01:21 PM, Byron Servies wrote:
> Hi Gordon,
>
> I recently, and finally, got to the point where I needed to set up
> band maps in my KRC2. I also use PCIe serial cards and Windows 10 and
> the problem I had was the cable. Once I built a cable using exactly
> the pinouts in the KRC2 manual (instead of cables I had laying
> around), it worked fine, as did the firmware update.
>
> Sorry I cannot be of more help, but that is what worked for me.
>
> 73, Byron N6NUL
>