[Elecraft] CM 500 setings

[Sfbonk]

Another route is the PTT jack in the rear. Most often used with a foot switch, but any switch to ground will work.

W3OU Steve

 

 

 

-----Original Message-----
From: Wes (N7WS) <wes at triconet.org>
To: elecraft <elecraft at mailman.qth.net>
Sent: Wed, Oct 21, 2015 7:02 pm
Subject: Re: [Elecraft] CM 500 setings


I always use a headset but sometimes use both the headphones and speaker if a

guest is in the shack and needs to hear the other station.  Hence the need for

anti-vox even with a headset.

Gad, just realized there is not hand or stand
mic in the shack and no way to use 
PTT.



On 10/21/2015 2:23 PM, Dave
Hachadorian wrote:
> If you are using a headset, rather than a loudspeaker, you
can set antivox = 000.
>
> Mine has been sitting at zero for years.  I never
even looked at it before 
> today.  I never use a speaker.
>
>
> Dave
Hachadorian, K6LL
> Yuma,
AZ
>
>

______________________________________________________________
Elecraft
mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This
list hosted by: http://www.qsl.net
Please help support this email list:
http://www.qsl.net/donate.html
Message delivered to sfbonk at aol.com