[Elecraft] When is mode A not mode A?

[Ken Alexander]

It sounds like you have a Mode A keyer and a Mode B hand Roger!  There's a switch somewhere to change your hand back to Mode A.  Hope you kept the manual!!  :-)

73 - Ken
VE3HLS


--------------------------------------------
On Wed, 10/21/15, Roger Crofts <roger at monitorsensors.com> wrote:

 Subject: [Elecraft] When is mode A not mode A?
 To: "elecraft reflector" <elecraft at mailman.qth.net>
 Date: Wednesday, October 21, 2015, 6:04 PM
 
 I love my KX3 and its little paddle.
 Unfortunately my keying is full of mistakes. When I send the
 letter C for example, it often comes out as CT or K. I
 thought the KX3 must be set to mode B keying, but no, it was
 on mode A. I originally learnt to send on an ETM-3b squeeze
 keyer many moons ago. The ETM-3b is a mode A keyer. I tried
 plugging a Bencher paddle into the KX3 but the problem
 remained, so the paddle is not the problem. Is the mode A,
 that I am used to, somehow different to the mode A in the
 KX3?
 
 Roger, VK4YB
 
 ______________________________________________________________
 Elecraft mailing list
 Home: http://mailman.qth.net/mailman/listinfo/elecraft
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Elecraft at mailman.qth.net
 
 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 Message delivered to k.alexander at rogers.com