[Elecraft] KRC-2 and 6m

[Jack Brindle]

You probably need to set the K3 to output the right selection to the KRC2. Check the K3 manual for the KRC2 menu entry - in the rev D10 manual it was on page 57.

Essentially, select the KRC2 entry in the K3 configuration menu, then tap the 1 button on the K3. You want it to show BAND6=B6 for it to work properly.

Your next question will be which KRC2 terminal is selected when this is set properly. For the standard (factory default) bandmap it will be the XV1 terminal. Of course you can remap it as you desire with the KRC2 Utility.

73,

Jack Brindle, W6FB


> On Oct 20, 2015, at 7:00 PM, Jim Miller <jim at jtmiller.com> wrote:
> 
> How do you get an output for 6m from the KRC-2?
> 
> 73
> 
> jim ab3cv
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to jackbrindle at me.com