[Elecraft] Mic Settings
David Cole
dave at nk7z.net
Tue Oct 20 17:47:40 EDT 2015
Jim,
I would take you up on that if possible as well!! Pick a time...
--
Thanks and 73's,
For equipment, and software setups and reviews see:
www.nk7z.net
For MixW support see;
http://groups.yahoo.com/neo/groups/mixw/info
For Dopplergram information see:
http://groups.yahoo.com/neo/groups/dopplergram/info
For MM-SSTV see:
http://groups.yahoo.com/neo/groups/MM-SSTV/info
On Tue, 2015-10-20 at 09:36 -0700, Jim Brown wrote:
> On Tue,10/20/2015 8:51 AM, john at kk9a.com wrote:
> > I am using a Heil HC-4 element with no
> > equalizer settings, mic 30 compression 18.
>
> Hi John,
>
> I'd be happy to listen to you on the air and talk you through adjustments.
>
> Some suggestions. Ignore your numbers of 30 and 18 -- they are the wrong
> thing to look at. Start with TXEQ -- set the three lowest bands to
> maximum cut, take the 4th band down about 6 dB. Leave everything else
> set flat (0dB). Now, turn compression all the way down, and adjust your
> mic gain so that you see occasional peaks of full power. To get the
> right setting, you may need to temporarily increase VOX GAIN. Now, turn
> up compression so that on the compression METER, you see peaks of about
> 10 dB. This is the way you want to run it.
>
> This will get you in the ballpark, and it's time to get some signal
> reports. Also, if you're like me, you probably yell louder during the
> contest, so be prepared to turn the mic gain down to stay within those
> settings.
>
> You will, of course, want to balance the live mic with recordings. The
> above assumes that the live mic is on the mic input and the computer is
> on the Line Input. That's how I work. So once you're adjusted for the
> live mic, you'll want to adjust computer playback to get the same
> indications of compression.
>
> There's more to the computer gain adjustment. It's written up here,
> following the disucssion of computer sound cards.
>
> http://k9yc.com/USB_Interfaces.pdf
>
> 73, Jim K9YC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to dave at nk7z.net
More information about the Elecraft
mailing list