[Elecraft] (no subject)

[Jeff]

Tnx to Bill, NR4C for figuring out my problem and offer solution, I'm back 
in business..

73 Jeff W7JW


-----Original Message----- 
From: Jeff
Sent: Saturday, October 17, 2015 2:55 PM
To: Elecraft at mailman.qth.net
Subject: [Elecraft] (no subject)

Help please.  I’m running N1MM through USB comm port to K3s and can’t key 
the rig on CW from N1MM. I seem to have CAT control of QRG, modes and audio 
as I can use MMTTY from within N1MM on RTTY (not VOX).  Comm port is defined 
as suggested in N1MM but K3s is config PTT-KEY  “OFF-OFF”. I don’t know 
which of the 6 options within this menu to use as N1MM suggest RST and DTR 
always off.

73 Jeff W7JW
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to w7jw at arrl.net