[Elecraft] K3S LP-Bridge Setup - How Does the K3S Know?

[Don Wilhelm]

Byron,

LP-bridge must connect to whichever real port is connected to the K3S.
Look in your computer's Device Manager (open Ports) to determine which 
COM port was assigned to the K3S USB to serial adapter, then tell 
LP-Bridge to connect to that port.

73,
Don W3FPR

On 10/17/2015 2:04 PM, Byron Peebles wrote:
> I do see how to SET the COM Ports in LP-Bridge, but I missed something 
> in how to tell what they should be on the K3S side.  I would think I 
> need CAT Control, Analog Audio (RTTY AFSK) and CW Keying.  What is the 
> means by which I determine the K3S side of things?
>
> 73, Byron
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3fpr at embarqmail.com
>