[Elecraft] K3S - AFSK problem, need help!

[Richard Ferch]

Dick,

In the N1MM+ Configurer, under the Mode Control tab, right hand side 
where it says Mode sent to radio, beside RTTY make sure it is set to 
AFSK (for both VFOs if you are using SO2V). If you set this to RTTY, 
N1MM+ will put the K3 into FSK D every time you change bands, click on a 
spot or use the software to change the radio's frequency.

Re the MIC control, after putting the radio into AFSK A mode make sure 
that MAIN:MIC SEL is set to LINE IN.

73,
Rich VE3KI


K9OM wrote:

> When I QSY, the K3S often switches from AFSK to FSK all by
> itself, and then I have to manually select DATA MD and reset it to  AFSK.  (must
> have reset it 25 times in the past 3 hours)