[Elecraft] KX3 - easiest way to panadapt?

[Barry LaZar]

Ed,
     You will need to buy one additional bit, a good sound card. NaP3 is 
a good product, It's really an earlier version of PowerSDR than is out 
today. It is free, but you will want to download LP-Bridge, not Bridge2. 
This will allow you to integrate your logging and digital software with 
what you have your KX3 doing.

     I used this initially and was quite happy. I later switched to the 
Win4K3 suite which costs $50, but it does offer some real advantages. 
First you can use com0com , which is free, for your port replication. 
This setup has been less problem prone on my system over NaP3 and 
LP-Bridge. Second, you have more control of your KX3.

73,
Barry
K3NDM

------ Original Message ------
From: "Ed via Elecraft" <elecraft at mailman.qth.net>
To: elecraft at mailman.qth.net
Sent: 10/16/2015 6:24:37 PM
Subject: [Elecraft] KX3 - easiest way to panadapt?

>
>I have a KX3.  I would like to use my computer and laptop ( Windows 7 
>and
>Windows 8 ) to display a spectrum from my KX3, using the RX I/Q output.
>What is the simplest and recommended easiest way to do this?  NaP3 ?
>
>I use my KX3 mostly on digital modes .... with SignaLink USB interface 
>and
>sometimes with just the laptop soundcard interface.
>
>Ed   K7AAT
>
>______________________________________________________________
>Elecraft mailing list
>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>Help: http://mailman.qth.net/mmfaq.htm
>Post: mailto:Elecraft at mailman.qth.net
>
>This list hosted by: http://www.qsl.net
>Please help support this email list: http://www.qsl.net/donate.html
>Message delivered to k3ndm at comcast.net