[Elecraft] LP-PAN 2 and P3

Thu Oct 15 20:51:13 EDT 2015

Hi Steve

Well, PC will be a issue, I not have good PC´s with the radio. Just Dual core and not new, I am using two Dell 630 

Thanks for the advise

De: Steve Lund [mailto:k6um.elist at gmail.com] 
Enviado el: jueves, 15 de octubre de 2015 01:47 p.m.
Para: Jorge Diez - CX6VM
CC: Elecraft Reflector
Asunto: Re: [Elecraft] LP-PAN 2 and P3

Jorge,

There is a good comparison chart for the LP-PAN vs P3 on the telepostinc website (http://www.telepostinc.com/).

I recently got my LP-PAN working with NaP3. No one has commented about pc requirements. I originally tried to use LP-PAN with my single core XP pc. While it ran, the cpu load was 100% and no other software could be run with it. I recently upgraded to a 4 core 64 bit Win7Pro pc. The cpu load is around 20% with LP-PAN running along with my logging and packetcluster software. You'll also want a large monitor (or put a dual monitor card in the pc) as once you get hooked on LP-PAN, you'll always have it running!

The only advantage I see for the P3 is that a computer is not required.

Steve, K6UM

On Thu, Oct 15, 2015 at 3:40 AM, Jorge Diez - CX6VM <cx6vm.jorge at gmail.com> wrote:

THANKS for all the replies, very clear to understand!

And also need to use N1mm like Davis, hope I can do it

Thanks,
Jorge

-----Mensaje original-----
De: Elecraft [mailto:elecraft-bounces at mailman.qth.net] En nombre de David
Smith
Enviado el: jueves, 15 de octubre de 2015 07:10 a.m.
Para: elecraft at mailman.qth.net
Asunto: Re: [Elecraft] LP-PAN 2 and P3

I have an additional question in addition to Jorge.  I recently installed my
LPAN2 (I do not have a P3).

My question is that can I run my LPAN2 at the same time I run N1MM+.   I
tried and got a port conflict the with K3.  Also, I run SO2R with 2 K3s and
never made it that far to check additional port conflicts as I didn't make
it past the first port conflict.

Any comments appreciated.

David, ND4Y

-----Original Message-----
From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jorge
Diez - CX6VM
Sent: Wednesday, October 14, 2015 9:01 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] LP-PAN 2 and P3

Hello

I am looking for information about LP-PAN 2 and the P3 SVGA

Not understand at all about them, are the same?

May I use LP-PAN 2 without P3 or there´s any benefit using both LP-PAN 2 and
P3

Or is better to use just the P3 SVGA

Thanks,

Jorge

CX6VM/CW5W

---
El software de antivirus Avast ha analizado este correo electrónico en busca
de virus.
https://www.avast.com/antivirus
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message
delivered to dlsmith at harlanonline.net

---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html Message

delivered to cx6vm.jorge at gmail.com

---
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
https://www.avast.com/antivirus

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to k6um.elist at gmail.com

---
El software de antivirus Avast ha analizado este correo electrónico en busca de virus.
https://www.avast.com/antivirus