[Elecraft] KX3 + fldigi (PSK31)

[Kyle Krieg]

Bob,

Thanks for you reply.  Here are my mixed results.  Some of these items are
solved.

1) My lower limit was set to 0, so I bumped it up to 100hz.  It removed a
small sliver of waterfall on the left hand side, but kept the large black
gap between 0 and ~600hz.  Not sure if that is the way fldigi just displays
waterfalls and that portion of the sideband...

2) Fixed!  I think with your and Don's help, I got this one solved.  Thanks
for your input.

3) I changed my "transmit signal" under Waterfall -> Display to .05, which
is the lowest it will go before 0.  It was set at .10, so one tick to the
left and my transmit waterfall waveform still gets pushed outside the red
waterfall selector.  I adjusted my output level in Windows for my Signalink
down to 25% with still no change in waveform on the waterfall.  Did the
same test on my signalink TX

4) This one is solved.  Your comment about PPT tone and serial port PPT got
me looking at my rig control.  I use hamlib as my rig control, and under
that menu, PPT via Hamlib command was checked. I uncheck that box and now
the radio returns to receive mode after transmitting!  Resolved!!!