[Elecraft] clifton laboratories Z10000 still available?

[Joe Subich, W4TV]

Documentation on both the "universal" and K2 versions of the Z10000
are still available on Jack's web site - check the documents link:
    http://cliftonlaboratories.com/Documents.htm

If the parts are available in suitable form, one can reasonably
breadboard a Z10000 from the documentation provided.

73,

    ... Joe, W4TV


On 10/13/2015 3:26 PM, Wayne, W5XD wrote:
> I want to build a SoftRock panadapter for my K2, and understand from
> http://www.cliftonlaboratories.com/k2_interface.htm its advisable to put
> an amplifier between the K2 IF tap and the SoftRock, and its their
> Z10000 recommended.
>
> But I don't get any answers to emails to the address on that page.
> Does anyone know how to get a Z10000 or equivalent for the K2?
>
> My apologies if everyone on this list has seen the answers before--I
> tried searching archives, but failed to anything on
> http://mailman.qth.net/ that enabled searching this list...other than
> clicking on every single posting in the archive...which I did not
> do...If you know how to search, tell me that, too.
>
> Thanks,
> Wayne, W5XD
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to lists at subich.com
>