[Elecraft] Windows 10 and LP-Bridge

[Gary]

Cannot for the life of me consider leaving DX Labs Suite. It just works, k3 control, logging, cluster, propogation and so forth.
Well supported and I like free.
No offence to those who supply/sell/support other platforms.
Choice in the market is great.
Back to Dx-Ing on the k-line 
Gary

-----Original Message-----
From: "ae4pb at carolinaheli.com" <ae4pb at carolinaheli.com>
Sent: ‎14/‎10/‎2015 1:31 AM
To: "w3fpr at embarqmail.com" <w3fpr at embarqmail.com>; "ae4pb at carolinaheli.com" <ae4pb at carolinaheli.com>; "'Tom'" <tomb18 at videotron.ca>; "'Barry LaZar'" <k3ndm at comcast.net>
Cc: "elecraft at mailman.qth.net" <elecraft at mailman.qth.net>
Subject: Re: [Elecraft] Windows 10 and LP-Bridge

Oops.. I just thought it was dead because all of the videos are dead links
and the youtube channel appears to have been deleted.


I currently own the Ham Radio Deluxe suite. I was looking at using the
Win4k3 to replace the radio control part and use the rest of HRD. I'm
wondering if it would be best to customize HRD or go with Win4k3? I'm still
researching things. At this point I'm looking to modify the HRD radio
control interface (it's highly modifiable) but it's really a daunting task.
The interface  is ok but too busy. I was hoping to hear from other hams how
they use/modify HRD..etc.. 

I don't want to get buried too far in projects that keep me off the air but
don't mind the occasional distraction.

At the end of it all I may end up using Win4k3 if I am not able to get HRD
to do what I want. I'm not sure how to properly leverage HRD as I seem to
operate primarily in the logging software which includes the DX cluster. I
see the Radio control screen as mainly a place to setup and store
configurations per band/mode/situation(DX/contest..etc) than something to
run full time. Maybe I'm missing something ?

One thing I'm considering is to remote my rig to my shop. Then I could have
a tower in the back yard without long feedlines (that contribute to signal
loss). Slowly looking at that. The Raspberry Pi hardware looks perfect as
the bridge platform.



Jerry Moore
CDXA, INDEXA, SKCC, Fists
AE4PB, K3S - S.N. 010324
http://www.qrz.com/db/AE4PB
An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, and
Patriotic.


-----Original Message-----
From: Don Wilhelm [mailto:w3fpr at embarqmail.com] 
Sent: Tuesday, October 13, 2015 10:53 AM
To: ae4pb at carolinaheli.com; 'Tom'; 'Barry LaZar'
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] Windows 10 and LP-Bridge

Jer,

Win4K3suite is alive and well, and unless something has happened in the last
few days, Tom va2fsq is actively supporting it.
In fact, that is the same Tom who answered about using comOcom earlier this
morning.

73,
Don W3FPR

On 10/13/2015 10:23 AM, ae4pb at carolinaheli.com wrote:
> I'm thinking Win4k3Suite isn't supported anymore. All of the video 
> links on their site are dead.
>
> Is anyone using Ham Radio Deluxe and is willing to share any 
> customizations ? I'm about to delve into that and don't want to 
> re-invent the wheel if someone has already done a bunch of it.
> Thanks in advance.
>
>
> Jerry Moore
> CDXA, INDEXA, SKCC, Fists
> AE4PB, K3S - S.N. 010324
> http://www.qrz.com/db/AE4PB
> An Amateur is - Considerate, Loyal, Progressive, Friendly, Balanced, 
> and Patriotic.
>
> -----Original Message-----
> From: Elecraft [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of 
> Tom
> Sent: Tuesday, October 13, 2015 8:01 AM
> To: Barry LaZar
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] Windows 10 and LP-Bridge
>
> Hi Barry,
> No, com0com is a software null modem cable used to connect two pieces 
> of software via a virtual port pair. It has no logic for operating a 
> k3. The reason it works for you is that you are using Win4k3Suite, 
> which has a built in router that performs k3 command routing. win4k3 
> has functionality that replaces lpbridge, and it uses com0com only as a
connector.
> 73 Tom
>
> Sent from BlueMail
>
>
>


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vk1zzgary at gmail.com