[Elecraft] K3S - Method to print K3/K3S configuration files from K3 Utility

[Rick Bates]

A further thought is that as things in the radios, amps, tuners age (caps, crystals) it could be useful to compare the values saved over the years to avoid impending (sudden) failure.  Not knocking Elecraft, but stuff happens. 

73,
Rick wa6nhc

Tiny iPhone 5 keypad, typos are inevitable

> On Oct 13, 2015, at 11:15 AM, Mike Harris <mike.harris at horizon.co.fk> wrote:
> 
> I just printed the Menu and Config pages of the current manual and went through my K3 settings manually noting them against each item.  Didn't take long but it would be very convenient to be able to just capture them from the saved config. Years ago there was a little app which scrolled through the K2 menus and captured all the current settings ready for printing.
> 
> Regards,
> 
> Mike VP8NO
> 
>> On 13/10/2015 14:56, Bill wrote:
>> I gave up on this a long time ago. And, I thought it should have been
>> very simple - hahaha.
>> 
>> I keep a spiral notebook (1" thick 8"x11") for notes and commentary
>> regarding settings and changes made to my K-Line system. Those notes
>> have saved my bacon several times.
>> 
>> I do all my configuration changes by hand from the front panel. I
>> decided to do that when I caught K3EZ making unwanted changes - changes
>> I had not made.
>> 
>> It would be nice if there was a replacement for K3EZ. I am sure it would
>> sell well - if it worked properly.
>> 
>> Bill W2BLC K3-Line
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to happymoosephoto at gmail.com